Granton Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.

4" Paring Knives

With serrated edge.

Senator® Tool Kits

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

90 Piece Engineers' Tool Kit

24 piece 1/2" drive metric socket set.
6 piece 16cm cut 2 assorted needle file set.
10x 12 x 1/2" x 18tpi all hard hacksaw blades.
8"/200mm chrome vanadium adjustable spanner.
12" Rule - walleted.
Metric/inch feeler gauge 60mm blade length.
1.1/2lb ball pein hammer- hickory shaft.
16oz black rubber mallet - wood shaft.
5M/16ft locking tape rule - chromed case.
8 seg 18mm heavy duty snap-off blade knife.
Retractable trimming knife.
DIY hacksaw.
2x 50mm G clamps.
2x 100mm G clamps.
6" snipe nose plier/side cutter.
6" diagonal cutting nipper.
7" linesman plier.
10" multiple slip joint plier.
10" straight jaw high strength grip wrench.
16 function 10-blade tool.
15 piece duel grip screwdriver set.
14 piece 6-19mm drop forged open ended spanner set.
All supplied in a Senator 21" steel cantilever toolbox

Line Level

This durable line level is made hard wearing plastic. Fitted with reversed line hooks for a positive hold and a pocket clip.
Overall length: 75mm (3"), 13mm (1/2") diameter.

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

A/F

Wooden Sash Brushes

Wooden handle with steel ferrule.

16mm Spigot

1/2" Ratchet C/W Push Through Square Drive

Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

A/F

Double Flaring Tool Set

Manufactured to double flare soft steel, aluminium and copper tubing up to .040" wall thickness producing SAE 45 flares. Heat treated alloy steel swivel is precision ground and chromed to reduce friction. Heat treated drop forged yoke. Each adaptor is clearly stamped with the size for easy identification. Bright lustre plate finish with contrasting black oxide. Will also produce a single flare. Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", & 5/8".

Kennedy Professional 1/4 '' Square Drive Socket Sets

Kennedy Professional 1/4 ''square drive sockets are ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Each Socket has a double knurl feature for better grip, essential for a quick tool change when your hands are greasy/oily. The 12-point bi-hexagon side drive design will deliver higher torques than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006 : 1992.

Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.

For the full range of Kennedy Professional Sockets and Accessories please refer to our catalogue.

TSD51MA ?? Square drive 51 Piece Metric/AF Standard/Deep Socket Set

The Kennedy Professional TSD51MA 1/4 '' Square drive Metric/AF Standard/Deep Socket Set contains 51 pieces:

1/4'' Square Drive:
Standard Sockets (Metric): 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm.
Deep Sockets (Metric): 6, 7, 8, 9, 10, 11, 12, 13 and 14mm.
Standard Sockets (AF): 3/1'', 7/32'', 1/4'', 9/32'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'' and 9/16''.
Deep Sockets (AF): 3/16'', 7/32'', 1/4'', 9/32'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'' and 9/16''.
Accessories: Ratchet handle (rubber grip), 100mm sliding T-handle, 100 & 250mm extension bars, 50 & 150mm wobble extensions, universal joint, spinner handle, 150mm flexible extension, swivel handle rubber grip.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.