Extension Bars

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Sizes 1/2" and above feature a hole to accommodate a pin and ring to prevent accidental removal for added security.

Stik’n Guard Carpet Protector

Disposable Stik’n Guard is a 60cm wide roll of polythene that can be laid on your carpets for protection, and then left until the job is complete. Backed with a low-tack adhesive that lightly sticks to the floor, it's even safe on stairs and won't slip and slide around (unlike plastic dustsheets) and will not leave any marks on removal.
Ideal for use in high traffic areas during building, extensions, renovations, removals, painting and decorating or parties.

Scrapers (Scale Tang)

Heavy-duty, with scale tangs, tempered flexible steel blades and polished rosewood handles. Polished sharp blade for removing paint and wall coverings.

Resin Core Solder

General purpose grade (60/40) for a wide range of joint applications. Supplied in tube dispenser.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

STHT1-05868

Bi-material handle provides comfort and protection. Makes carrying drywall and other boards easier. Sold in pairs.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Hammer Shafts

Made from genuine hickory with a waxed finish. Manufactured to BS 3823.

Kennedy® Magnetic Tray

For holding metal items such as nuts, bolts, washers etc.

Rectangular Tray

For holding larger items.