Socket Rails

Made from steel, bright chrome plated and can be fixed or loose in a toolbox, or fitted to a bench or wall. Can be used with any size square drive socket. Clip listed below.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

1? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Drawer Sliders

For cabinet and chest compatibility, please refer to our catalogue.

Fluke Multimeters

These new clampmeters from Fluke, provide the highest level of safety and performance in a rugged ergonomic package. They are True RMS measuring to provide accurate measurements on today?s electronic systems.

Most models measure both AC & DC current and voltage, and have additional features to aid in troubleshooting everyday problems.

Designed to operate in harsh environments, some models have an integrated low pass filter and signal processing for stable readings in electrically noisy areas.

Models that feature Fluke's proprietary inrush measurement technology, filter out noise & capture motor starting current exactly as the circuit protection sees it.

373 True-rms AC Clamp Meter

The new Fluke 373 clamp meters offers improved performance perfect for many AC only current measurement situations. With true-RMS AC voltage and current measurements, the Fluke 373 reads up to 600A AC and 600V AC or DC.

Fluke model number: 373
Application: Industrial/Residential/Commercial
Cable size jaw (& cable size iFlex): 32 mm
i-flex flexible current probe included: n/a
True RMS: YES
AC Current (clamp) to: 600A
AC Current (i-flex) to: n/a
DC Current (clamp) to: n/a
AC Voltage to: 600V
DC Voltage to: 600V
Resistance & Continuity: YES
Frequency to 400Hz: n/a
Temperature measurement -10°C to + 400°C: n/a
Motor Start-up (inrush current) capture: n/a
Detachable jaw clamp & torch: n/a
Low pass filter for noisy environments: n/a
Removable display operates up to 10 metres: n/a
mV range compatible with other accs: n/a
Min/Max logging: n/a
Display backlight: YES
Display Hold: YES
Warranty (years): 3
Safety rating: CAT III 600 V, Cat IV 300 V

Note : Cat IV is a higher safety rating

Swedish Pattern Pipe Wrenches

Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle. Conform to DIN 5234.

"S" Type

"S" shaped jaws grip at three points to ensure a maximum grip.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Metric

Flaring Tool Set

Each set can be used to produce convex and double lap flares to SAE and DIN standards, accurately, reliability and efficiently on automotive brake and clutch pipes. Manufactured from hardened and ground steel, the formers are mounted on a revolving turret for easy selection with cam lever action for positive former location in the die. Automatic return.

27002

Pipe sizes: SAE single and double: 3/16" & 4.75, 6, 8 & 10mm. DIN single: 4.75mm.

Adjustable Flat Bits

Manufactured from high carbon steel ground and honed blade suitable for cutting holes in wood, plastics etc. Cutting diameter can be infinitely varied within range. Graduated scale with locking screw. For use in 3 jaw chucks. 9.6mm hexagon shank. Overall length: 170mm.

Kennedy Pro-Torq Screwdriver Set

Contents (mm): Crosspoint: No.1 x 75, No.2 x 100, No.3 x 150. Pozidriv: No.2 x 100. Flared: 6.3 x 150, 9.5 x 250. Parallel: 5.0 x 100, 5.0 x 200.

8 Piece - AF

Senator® Hi-Vis Locking Tape Measures

Tough plastic case. Locking spring assisted blade return. Riveted metal end hook. Steel belt clip and wrist strap. 5M and longer tape hooks have 4 rivets (3M/10' tape hooks have 2).