Replacement Bolt Cutter Jaws

Centre Cut Jaws designed to efficiently cut high tensile materials by directing the force being applied into a small area. Ideal for use on materials such as non ferrous rods and bars, mild steel bolts etc.

Centre Cut

225-Plus 12" Hacksaw

Professional hacksaw frame that allows very high blade tension for accurate and exact kerfs. Spring tensioned blade loading mechanism and strong rectangular back section for blade storage. Alternative 55° blade mounting for flush cutting.Can also be used as a compass saw. Supplied complete with a 300mm/12" Sandflex 24TPI bi-metal blade.

1/4" Square Drive Screwdriver Bits

Manufactured from high quality chrome vanadium, fully polished finish. Conform to DIN. Overall length: 37mm. Bit length: 19mm.

Torx

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

AF Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

Adcola Soldering Irons

The K212-3 12 volt AC/DC Soldering Iron is supplied complete with tip, a suspension hook and four metres of cable fitted as standard with cigar lighter plug, battery clips and cigar lighter socket.

The Adcola K212-3 soldering iron kit is suitable for use soldering components onto printed circuit boards, micro-electric soldering SMD and general use in the electronics industry.

The lightweight design with a shim retained tip to prevent seizure and the K series iron is so that an efficient heat flow is maintained to the tip, while the handle stays cool.

K212-3 12V Low Voltage Soldering Iron Kit

K212-3 specification:
Rated 400°C to 420°C (750°F to 790°F).
Tip diameter 4.75mm (3/16'').
Supplied with 4057 Adiron tip.
K2240A/S Iron is fitted with an antistatic handle and 5036 copper tip.
Wattage equivalent: 25.

Kennedy® Standard Duty Scrapers - Tool Steel Blade

All have wooden contoured handles with high grade steel blades which are hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots by removing minute amounts of metal from a surface which has been previously machined or filed.

Half Round

For use on hollow surfaces such as bearing linings and internal cylindrical surfaces.

Lever Pump

Zinc plated, self adjusting telescopic suction tube. Comfortable lever grip. Suitable for lubricants and non-corrosive liquids. Suitable for container sizes 60 & 200Ltr. Tube length 480-900mm, For use with BSP and metric threaded barrels.

Pro-Torq Screwdrivers

Dual grip triangular handle design improves user comfort, allowing more torque to be applied. Chrome vanadium steel blades with magnetic tips. Manufactured with convenient hanging hole in the handle for storage.

Torx

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Whitworth