Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Chisel Cross

4-point spark resistant chisel with 20mm wide hexagon shaft.
Length: 200mm

Block Plane

With tough enamelled alloy bodies and high carbon heat treated steel blades.



For single handed use, giving compactness and precision filing. Blade length: 140mm.
Blade width: 40mm.
Overall length: 140mm.

Eclipse Saws

Eclipse 70-FS1R fretsaw for fine cutting work in thin materials such as wood, bone, plastics, etc - ideal for model makers

70-FS1R Fretsaw

Length: 460mm (18,3/8")
Height: 130mm (5")

Professional Open Ended Spanners

Manufactured from chrome vanadium steel with a highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance. Conform to ASME B107.9.

Metric

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Tamperproof Torx

For repair and servicing on electronic, electrical and mechanical equipment.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

1? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Thread Scissors

Compact design to fit comfortably in the palm of the hand provides precise control of the cutting action when removing threads from garments. Spring-loaded blade opening.

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy Fuel Container

Suitable for transporting and storage of Petroleum Spirit and Diesel. UN approved, conform with S.I. 1982/630 Petroleum Spirit Plastic Container Regulations 1982.

5 Litre Fuel Container

Green for unleaded/lead free fuel.

1/4" AF Hexagon Drive Screwdriver Bits

All double ended screwdriver bits with 1/4" Hex and overall length 60mm (2.3/8").

Slotted x Crosspoint