Spares to suit KBE2800100A Rivet Nut Attachment.

Sitesafe Post Rammer

S65424
All-steel post rammer is the ideal tool for driving posts into the ground. Safer and more accurate than using a sledge or club hammer.

Length: 710mm (28”).
Maximum post capacity: 150mm (6”) diameter.
Weight: 14.5kg (32lb).

Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles 6?? (150mm), combined socket and blade length. Overall length: 230mm.

Inch (BA)

Replacement Nozzles for Industrial Lazy Tong Riveter

To suit KEN-569-3020K/-3040K.

Senator® Quality Tooling Tool Kits

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

Home Handyman Tool Kit

Contents:
• Tool box with tote and wheels.
• 8 piece fluted handle screwdriver set: flared 6mm stubby, 3 x 100mm and 8 x 200mm; parallel 3.2 x 75mm and 4 x 150mm; posidriv No.2 Stubby, No.1 x 75mm and No.2 x 100mm.
• 10 piece screwdriver bit set: 6mm quick release hex bit adaptor; flat 3, 4, 5, 6, and 8mm; crosspoint No.0, 1, 2 and 3mm.
• 18 piece wood, metal and masonry drill set 3, 4, 5, 6, 8 and 10mm bits. • IDH013 240V 13mm impact drill.
• 200mm (8”) chrome vanadium adjustable spanner.
• 225mm (9”) hi-vis magnetic boat level.
• 600mm (24”) hi-vis girder section level.
• 19mm x 33m black PVC insulation tape.
• 150mm euro tester range 125/250V.
• Adjustable telescopic 300mm diameter inspection mirror.
• Magnetic pick-up tool extends to 650mm.
• Bradawl.
• 450g (16oz) claw hammer wood shaft.
• 3m/10ft Senator hi-vis locking tape.
• 13 segment 9mm standard snap-off blade knife.
• Retractable trimming knife c/w 5 blades.
• Junior hacksaw frame c/w hardened blade.
• DIY hacksaw frame.
• 177mm (7”) plastic handled multi-purpose household scissors.
• 63mm (21/2”) half tang filling knife.
• 76mm (3”) half tang scraper.
• 150mm (6”) linesman’s plier.
• 125mm (5”) snipe nose plier.
• 125mm (5”) diagonal cutting nipper.
• 255mm (10”) straight jaw grip wrench.
• 22” x 8pts homesaw hand saw.

Single Hexagon Sockets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. 6 point - offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket.

Single Hexagon Sockets

Axial Grip Wrenches

For auto body repair and steel fabrication. Chrome steel body with narrow profile jaws for confined areas. Straight line jaw motion allows clamping through holes. Push button release for one handed clamp releasing. No provisional (or track) welding required to hold auto body parts for assembly.

Angle Clamp

Clamps two sheet metal pieces of the same thickness at 90° to one another. Jaw width: 50mm. Throat depth: 15mm.

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

12.7mm x 7.6m

Kennedy® Parallel Pin Punches

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

100mm (4") Overall Length

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM383 Digital Multimeter

The DM383 Digital Multimeter from Edison™ is a compact unit that has a removable rubber protective holder, that protects it against the bumps and knocks encountered on site.

Features include:
Continuity testing.
Transistor hFE.
Reading/peak hold.
Fused current range.
Auto power off.
Overload indication.
Low battery indication.
Tilt stand/hanger.

DM383 specification
Voltage max: 600V AC/600V DC.
Current max: 10A DC.
Resistance max: 2M Ohms.
Safety rating: Cat II.
Supplied complete with: 9V battery.
1 year warranty.
Supplied with holster.

For the full range of Edison™ multimeters please refer to the catalogue PDF or enter the search EDI-516.