Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

16mm Spigot End Fittings

Metric

Flare End

Kennedy Air Line Tyre Inflators

This push-on type tyre inflator is robust and has a dial type pressure gauge reading from up to a maximum of 170 psi. The pressure gauge is protected from accidental damage by a rubber shock guard. Heavy-duty corrosion resistant body with steel operating lever, brass fittings and anti-shock rubber guard. 300psi rated fibre reinforced rubber hose. Accuracy conforms to EC Directive 86/217/EEC. Reading scale 2psi/10kPa (0.1 bar). Inflation range: 170psi/1200kPa (12 bar).

Heavy-Duty Dial Type Tyre Inflator

Jewellers' & Watchmakers' Tool Sets

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.

5 Piece with Nickel Chrome Molybdenum Alloy Steel Blades

Contents: Hexagon Ball: 1.3, 1.5, 2.0, 2.5 & 3.0mm.

AM-520

The Amprobe AM-500 series provides a model to cover commercial and advanced residential applications, the HVAC professional or electrical contractors. Features include a built-in flashlight to see wires and fuses in the dark, flame sensors, a Velcro strap and a carry case.



Designed for the HVAC professional, the AM-520 HVAC Digital Multimeter is complete with key functions such as temperature, micro amps used for flame sensor troubleshooting and capacitance to check motor start-up capacitors. The AM-520 measures a complete range of electrical parameters and features a built-in flashlight, a oethird hand” probe holder and VolTect non-contact voltage detection.

Voltage max: 400 AC/DC.
Current max: 400 AC/DC.
Temp. range: -40°C to +1000°C
Frequency: 10Hz - 10MHz.
Capacitance max: 400 mu F.
Safety rating: CAT III 600V, CAT II 1000V.
Weight: approx. 850g (incl. battery).

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

1" Drive Impact Socket

12-point, for additional torque grip.

Professional Combination Spanners

Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spanner, for easier cleaning and preventing corrosion. Long reach, wall drive. Conform with ANSI B107.9M.

A/F

Locking C Clamps - Swivel Pads

Wide and deep jaw profile, clears obstacles to firmly clamp sections that a normal grip wrench cannot. With swivel contact pads to allow tapered surfaces to be clamped.

Thor Soft Faced Hammers

A safer alternative for striking machined surfaces than conventional steel hammers. The impact resistant striking faces shape themselves to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place. The striking faces can be easily replaced once they have become worn. Available as standard, with a choice of 5 interchangeable face types:

Copper Face

Malleable iron head with two pure electrolytic copper faces, for high impact blows. Solid wooden handle.

Single Ended Ratcheting Wrenches

Used for installation and servicing work. Ratcheting head mechanism for use in confined spaces. The ratchet wheels and pawls are made of carbon steel, hardened and tempered. Finished in black with red plastic handles.

Square Lever Reversible

Inch. For use on square head fasteners. Lever ratchet mechanism to allow reversal without removal of wrench from fastener.