Stanley 28" FatMAX® Waterproof Tool Storage Solution

Constructed of structural foam for extra strength complete with an all round water seal ensuring safe and dry storage with an extra large storage capacity. Its tough ergonomic soft grip handle allows heavy loads to be carried with ease. The large metal rust-proof latches and padlock give added security. It has a portable tote tray designed to carry tools and small parts that is 3/4 length to give access to the large tool storage area inside. An integrated V-groove on top lid helps when sawing pipes and wood.
Dimensions: 71 x 30.8 x 28.5mm.

Neodymium Pot Magnets

Neodymium magnet in a cylindrical brass pot. Assembled with steel pole pieces to give a multi-pole effect which offers superior grip at the contact face ideal for clamping or lifting application. Ideally work at temperatures upto 80°C, but have a maximum working temperature of 100°C

Shallow with Thread

10mm AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Torx

Kennedy C-Hook Spanners

Manufactured from chrome vanadium steel with a black oxidised finish. Specifically designed for use with slotted retaining rings. Conforms to DIN 1810A.

Sitesafe Taper Mouth Shovels

General purpose shovel with tapered blade. All blades are hardened and tempered with an epoxy coating.

S15322

Type: solid socket.
Handle Type: MYD metal framed.
Shaft: metal.
Blade material: carbon-manganese steel.
Blade size: (W)240/215mm x (H)340mm.
Overall length: 1000mm.

1/2" Square Drive Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industries. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

A/F

AET100 107 Piece Apprentice Engineer's Tool Kit

Supplied in a robust toolbox c/w double latch.

Contents:
6 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75 and No.2 x 100mm, Flared 6.3 x 100 and 8.0 x 250mm, Parallel 5 x 100 and 5 x 200mm.
6 piece precision screwdriver set: Crosspoint PH0 and PH1, Parallel 1.4, 2.0, 2.4 and 3.0mm.
10-17mm 8 piece metric combination spanner set.
9 piece metric hex key set: 1.5-10mm.
8 piece 2nd cut file set: 1 each flat, hand, round, half round, 3 square and square.
12 piece 2nd cut needle file set: 1 each: hand, flat, knife, round, half round, square, 3 square, crossing, round edge joint, slitting, warding and barrette.
2 of each grade 0, 1 and 2 emery sheets.
Adjustable spanner 25mm capacity.
18 blade metric/inch feeler gauge.
Magnetic pick-up tool extends to 650mm.
7.5m/25ft locking tape rule.
Snap-off blade knife.
Junior hacksaw.
20 junior hacksaw blades.
300mm (12") hacksaw frame.
6 hacksaw blades.
General-purpose shears.
160mm snipe nose pliers.
160mm diagonal cutting pliers.
160mm combination pliers.
255mm straight jaw grip wrench.
6mm x 150mm flat cold chisel.
450g ball pein hammer.
175mm engineers' scriber.
30mm diameter inspection mirror (extends to 650mm).
150mm (6") engineers' square.
Centre punch.
150mm (6") pocket rule.
100cc grease gun.
Eye loupe.

Ratchet Combination Spanners - Metric

Ratchet combination spanners ideal for reaching in to awkward spaces. Ring head has a reversible ratchet system that gives small increments of only 5°. Both heads are angled at 15° for side access. Satin chrome finish. Conform to ISO 1711-1.

'Lightweight' Hacksaw Frame

Strong and rigid construction frame with 'D' style handle. Die cast aluminium handle. Wing nut and lever blade tensioning allow easy blade replacement. The blade can be set at 90 to allow straight cuts and at 35 to the frame to allow flush cutting. Supplied with all hard HSS blade, 300mm (12'').

Industrial Open Ended Spanners

Made from chrome vanadium steel with polished head and 15 offset. Conforms to ASME B107.9M 1994.