Kennedy Bottle and Trolley Jacks

The Kennedy T349 Instant lift 3 tonne trolley jack is capable in one stroke of the foot pedal of raising the 120mm dia load saddle, up to the jack point of the vehicle prior to lifting, this saves time. The frame of the T349 is constructed from heavy gauge steel with heavy-duty castors (swivel type at rear) to ensure that the trolley jack is stable under load. Automatic safety overload protection. Supplied with two-piece 1mtr handle.

GS and TUV approved.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

2 Tonne Quick Lift Trolley Jack

Model number: T349 Instant Lift.
Maximum load: 3 tonne.
Dimensions (L x W x H): 680 x 340 x 170mm.
Minimum height: 145mm.
Maximum height: 490mm.


(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Half Round/ Bullnose Chisels

Used for cutting round bottomed grooves in steel such as oil grooves and also for 'roughing up' surfaces to be chipped by a flat chisel. The job is made easier by cutting grooves across the surface with this type of chisel then the raised portion can be easily chipped away with a flat blade.
Cutting angle 40 - 50 degrees to the vertical.

Kennedy Cases - Accessories

NB: complete case is shown for illustration only. Case, contents and tools are not included.

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Rigid Blade

Spring tempered rigid steel blades. 150mm/6" 19mm blade width. Other lengths 25mm blade width. With hanging hole.

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Kennedy Chrome Finish Adjustable Wrenches

Kennedy industrial quality adjustable wrenches are manufactured from high strength 'I'-beam section chrome vanadium steel for improved strength and rigidity; the jaws are hardened and ground for extended tool life. An offset head angle of 22.5 provides positive torque control and the 15 slimline tapered jaws allows the wrench to be used in confined areas of access. The Kennedy adjustable wrench jaw opening exceeds ISO standards, providing you with up to 20% greater jaw capacity than conventional adjustable wrenches. Parallel jaws with smooth movable jaw adjustment and self-locking design prevent the jaws opening unintentionally even when under full load. Suitable for industrial and maintenance/assembly applications.

3 Piece Set - 100, 200 and 300mm

Contents 1 each of the following size of adjustable wrench:
Jaw capacity: 17mm (21/32"). Overall length: 100mm (4").
Jaw capacity: 28mm (1 3/32"). Overall length: 200mm (8").
Jaw capacity: 38mm (1 3/8"). Overall length: 300mm (12").

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

3/4? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Kennedy® Butane Soldering Tool Kit

Supplied in a robust plastic case with inlay.
Contents:
BS050 butane soldering iron, tip cleaning sponge, stand, four interchangeable tips: 4.8mm and 3.0mm, double flat, hot knife.

Kennedy Tool Pouches, Holsters and Belts

Kennedy tool pouches, tool holsters and belts are for the professional tradesman or the keen DIY'er. They are an ideal way to keep your tools close at hand when on site.

Our range includes products suitable for both indoor and outdoor use. They are available in a choice of materials from fully waterproof oil tan leather, full grain leather, split or suede leather or man made nylon and polyester fabrics.

Cordless Drill Holster

Kennedy Drill Holster features include:
Manufactured from natural split leather with riveted construction.
Fitted with 2 additional tool loops and an adjustable drill safety strap.
4 slits for belt attachment.
Tan leather with chuck key holder.
Adjustable retaining strap and 1 tool loop.
Belt not included.