Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B337
Maximum load: 3 Metric Tonnes.
Height range: 194 to 372mm Min/Max.
Max saddle adjustment: 60mm.
Weight: 3.75kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Adjustable Pipe Wrench

A general purpose pipe wrench with milled and hardened teeth which grips the workpiece tighter the more pressure is applied. Pressed steel handle with high carbon steel profiled jaws and knurled thumb-adjusting nut that easily adjusts with one hand.



Overall length: 230m (9")

Spare Tips

To suit the T-Handle Circlip Tool

Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Hex Driver Impact Sockets 3/8" sq. dr.

Hexagon sizes: 4, 5, 6, 7, 8, 10 & 12mm. Conforms to DIN 3129

Kennedy Engineers' & Electricians' Screwdrivers

Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

12 Piece Engineer's & Electrician's Screwdriver Set

For the dimensional specifications and a full list of the set contents please refer to our catalogue.

Set contents may vary slightly subject to product development and availability.

Contents: Flared: 6.5mm Stubby, 6.5 x 100mm, 8.0 x 200mm. Parallel: 3.2 x 75mm, 3.2 x 150mm. Crosspoint: No. 0 x 75mm, No. 1 Stubby, No. 1 x 75mm, No. 2 Stubby, No. 2 x 100mm, No. 3 x 150mm, No. 4 x 200mm.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

European Pattern Circlip Pliers

Industrial quality chrome vanadium hardened and tempered. PVC cushion grip handles. Coil sprung to aid operation.

Internal - Straight Jaw

Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

A/F

1" Drive Retaining Ring & Pins

To suit outer diameters: 46-58mm, 62mm and 78-86mm.