Kennedy® Standard Industrial Terminals - Red Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

External Spring Calipers

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points. Calipers are used for taking internal and external measurements, also for comparing distances or sizes.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

1? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Kennedy Mechanical Pullers

Kennedy three leg mechanical pullers are used for the removal of gears, ball races, bearings, pulleys and sprockets from drive shafts. With a range of reach capacities available (75 to 200mm) selecting the puller for the job could not be simpler. All have double-ended reversible legs so that they can grip internally or externally depending on your requirement.

Always use a three leg puller whenever possible. As they will grip the component being pulled more securely and the load is more evenly distribution across the three legs, this helps to make removal of the component easier and safer.

To select the correct Kennedy puller for the job you will need to determine what spread and reach capacity is required; spread capacity this is the width of the part to be removed and the reach capacity depth of the part to be removed.

For the full range of Kennedy hydraulic pullers and other Automotive tools please refer to our catalogue.

Internal/External Three Leg Mechanical Puller

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

Kennedy High Impact Resistant Tool Case

Manufactured from HDPE resin with extra thick aluminium trim for a tight closure. Fitted with a single steel fully riveted hinge, two chromed locks with keys, four rubber feet, heavy duty handle, a telescopic handle and large wheels for easy transportation. Inside there is a removeable and a hinged tool board, both with 30 elasticated tool loops, document wallet, three small parts organisers and a large base compartment for tools, accessories and spare parts.
Designed to be stacked and is ideal for widely travelled engineers that carry tools, spare parts and components.

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Kennedy® Coaxial Crimp Tool

Coaxial crimp tool with full cycle ratcheting crimp frame and adjustable crimp pressure. Carbon steel jaws with a chemically blacked finish and PVC handles. Suitable for RG cable: 6, 58, 59 and 62. Hexagonal crimp of 1.72, 2.5, 5.4, 6.48 and 8.22mm.

Model TCC 008

KENNEDY PROFESSIONAL BI-MATERIAL FILE HANDLES

These file handles have a polypropylene base with integral hanging hole, covered with a ribbed rubber grip for comfort and increased purchase.
Available in thre sizes:
Size O.
Size 1.
Size 2.

Kennedy Adjustable Spanners

Kennedy adjustable ?C? Hook Spanner are specially designed for use with slotted retaining rings, the hinge facility allows for use on a range of diameters for greater flexibility. Kennedy ?C? Hook spanners are manufactured from chrome vanadium steel with a highly polished chrome plated finish.

Adjustable ?C? Hook Spanner