产品 / 手动工具
编号：KEN5820220K
●产品描述：
Open Ended Spanners
Manufactured from chrome vanadium steel, hardened and ground jaws with narrow profile for easier access and use in confined areas. Suitable for industrial engineering applications. Conform to BS 1842 : 1952.
BA
编号：KEN5258030K
●产品描述：
Cross Pein Hammers
Traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to "driving home" with the flat faced pein.
Hickory Shaft
Hardened and ground forged steel head with polished striking face securely fixed to a close grain hickory shaft. Shaped to fit comfortably in the hand. Tapered head, suitable for use with small pins helps reduce over-strike.
编号：KEN5034560K
●产品描述：
Bearing Separators
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. Jaw hardness 42- 45 HRC.
编号：KEN6017640K
●产品描述：
CV Hex Keys
Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Set supplied in an indexed plastic holder. Individual hexagon key slots help to instantly identify missing keys.
编号：KEN5974280K
●产品描述：
Flat Bits
Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.
编号：KEN5672980K
●产品描述：
Replacement Jaws For Bolt Cutters
Designed to efficiently cut high tensile materials by directing the force being applied into a small area. Ideal for use on materials such as non-ferrous rods and bars, mild steel bolts etc.
Centre Cut Jaws
编号：KEN5588620K
●产品描述：
Locking C Clamps
Wide and deep jaw profile, clears obstacles to firmly clamp sections that a normal grip wrench cannot.
编号：KEN5801380K
●产品描述：
Open Jaw Spanners
Made from forged and hardened steel. Conform to DIN 894.
Single Ended
编号：KEN5822830K
●产品描述：
Industrial Combination Spanners
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.
Metric
编号：KEN5820570K
●产品描述：
Industrial Open Ended Spanners
Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.
Metric