Kennedy® Standard Industrial Terminals - Blue Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Flat Bits

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Kennedy® 600mm Pick Up Tool

4 prong steel retractable claw. Flexible steel stem with a spring loaded plunger to open and close jaws. Chrome plated and corrosion resistant. Ideal for recovery of small objects.

Kennedy AET200 Apprentice Engineers Tool Kit

Supplied in a 3 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed.

3 Drawer Top Chest:
Top compartment size 89 x 661 x 150mm, drawer sizes 51 x 591 x 282mm (x1), 102 x 591 x 282mm (x2).
3 Drawer Roller Cabinet:
Bottom compartment size 610 x 432 x 356mm, drawer size 591 x 410 x 102mm (x3).

AET200 Apprentice Engineers Tool Kit (208 Pieces)

Contents:
25 piece HSS drill set 1-13.00mm x 0.5mm.
6 piece 200mm double cut engineers' file set.
6 piece 16cm cut 2 assorted needle file set.
25x 230 x 280mm assorted emery sheet.
200mm chrome vanadium steel adjustable spanner.
6 x 150mm flat cold chisel.
19mm x 33m black PVC insulation tape.
76mm 18 blade combination feeler gauge set.
4.8mm square head centre punch.
150mm/6" stainless steel rule c/w pocket clip.
178mm double ended engineers' scriber.
Eye loupe.
Adjustable telscopic 30mm dia inspection mirror (expands to 180mm).
6 piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.
150mm (6") engineers' square - BS939 grade B.
Tap wrenches 1.5-6.4mm and 6.4-19mm.
Magnetic telescopic pick-up tool extends to 550mm.
29 piece engineers' bit set: all 6mm hex x 25mm overall length, complete with magnetic spinner handle, 6mm hexagon bit adaptor and 6mm square socket adaptor. Hexagon: 2, 3, 4, 5, 6, 7 and 8mm. Flat: 3, 4, 5, 5.5, 6.5 and 8mm, 3/32", 1/8", 5/32", 3/16", 1/4", 7/32" and 5/16". Crosspoint: No.1, 2 and 3. Pozidriv: No.1, 2 and 3.
450g(1lb) ball pein hammer wood shaft.
7.5m/25ft steel tape.
Snap-off 8 segment blade economy knife.
Retractable trimming knife with 5 blades.
Junior hacksaw frame.
300mm lightweight professional hacksaw frame.
6 off 12" x 1/2" x 18t HSS hacksaw blades.
20 junior hacksaw blades.
2 plastic handle household scissors.
150mm snipe nose plier with side cutter.
150mm diagonal cutting nipper.
150mm engineers' combination pliers with side cutter.
250mm curved jaw high strength grip wrench.
8 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75, No.2 x 100, Pozidriv No.2 x 100, Flared 6.3 stubby, 6.3 x 100, 8.0 x 200, Parallel 5.0 x 75, 5.0 x 150.
14 piece combination spanner set 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
25 piece metric socket set 1/2" square drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.
Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars.
9 piece metric hex key set 1.5-10mm.

Individual Nickel Plated Carbon Steel Founts

Precision manufactured carbon steel stamps with nickel-plated finish. For producing clean impressions in one impact. 3mm character height.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

TORQ-SET

Individual Nickel Plated Carbon Steel Founts

Precision manufactured carbon steel stamps with nickel-plated finish. For producing clean impressions in one impact. 3mm character height.

Kennedy Chalk Line Refills

Suitable for all chalk lines. Good colour fastness and weather resistance. Supplied in squeezable bottle. Available in three colours: Blue for general use externally and internally. Red for exterior masonry work indelible in use. White for interior use such as fixing a dado rail.

250gm

Swivel End Socket Wrenches

Designed to give greater flexibility and improved access when working in difficult conditions. Bi-hexagon (12 point). Manufactured from fully polished chrome vanadium steel. Conform with ANSI B107.5M.