Reversible Gent's Saw

Suitable for flush cutting in the most awkward corners on the left or right hand side. Reversible offset alloy steel blade cranked and polished with rigid back. Rosewood handle with brass ferrule. 15 tpi.

Internal & External Puller Set

Fully chromed carbon steel hammer and T-bar for smooth striking action. Supplied in a blow moulded storage carry case.



Fully hardened & chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.

Ball Driver L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30 work offset. Long arm end is ball drive and short arm end plain. Black oxidised finish.

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Metric

Spares for Kennedy Combination Squares and Rules

Scriber:
For 6" Combination Square (KEN-597-7060K)
For 12" Combination Square (KEN-597-7120K)

Kennedy Combination Spanner Sets

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset. Conform to DIN 3113 & BS 192 : 1982.

11 Piece - AF

Contents: 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 3/4", 1 7/8" & 2".

Kennedy® Taper Punch Set

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.



Contents: 1x 3, 4, 5, & 6mm

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Metric

10mm AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Torx

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.