Viscous Hub Spanners

For the removal of thermo, viscous fan hubs. Cranked for easy access. Suitable for most makes of car.

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

3/4? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Reversible Circlip Pliers

This set of 6 pliers are reversible for both internal and external circlip insertion and removal. Made from high grade carbon steel with comfortable insulated handles.

Straight & Bent Nose 6 Piece Reversible Circlip Plier Set

Panel Beating Dolly

Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish.

Grid Dolly

For shrinking work. With a large crowned grid face on the surface and a plain flat face on the base. This dolly, combined with a shrinking hammer and the use of heat, provides quick and effective shrinking.

Seal Repair Kits

To suit the Kennedy Hydraulic Bench Press (KEN-985-9460K) illustrated.

Double-Ended Feeler Gauge

Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification. Manufactured to BS957: 2008 Part 1 (Imperial) & BS957: 2008 Part 1 (Metric)

Metric & Imperial:

18 Blade: 0.05, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4 & 0.5mm. 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.010", 0.012", 0.015" & 0.025".

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy Mechanical Pullers

Kennedy three leg mechanical pullers are used for the removal of gears, ball races, bearings, pulleys and sprockets from drive shafts. With a range of reach capacities available (75 to 200mm) selecting the puller for the job could not be simpler. All have double-ended reversible legs so that they can grip internally or externally depending on your requirement.

Always use a three leg puller whenever possible. As they will grip the component being pulled more securely and the load is more evenly distribution across the three legs, this helps to make removal of the component easier and safer.

To select the correct Kennedy puller for the job you will need to determine what spread and reach capacity is required; spread capacity this is the width of the part to be removed and the reach capacity depth of the part to be removed.

For the full range of Kennedy hydraulic pullers and other Automotive tools please refer to our catalogue.

Internal/External Three Leg Mechanical Puller

Sash Brushes

Plastic handle. Ideal for cleaning out sawdust, swarf etc.