Kennedy® Shallow Pot Magnets

North polarity in centre separated from opposing pole by a continuous slot. For use in areas of restricted height. Supplied with plain bore fixing hole and keeper. Permanently magnetic. Can be used in temperatures up to 550C.

Kennedy® Standard Length Set

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.



Supplied in plastic wallet.
Contents:
(Diameter x Insert Length x Overall Length)
2x37x140, 3x51x153, 4x60x183, 5x70x200, 6x80x210 & 8x90x220mm.

Welders' Clamp

Deep throated, suitable for clamping sheet metal, body panels and sills, with split jaws to allow maximum visibility and access to the working area when welding. Quick release lever.

Knife Blades

To use in conjunction with the Kennedy 16 piece precision Knife Set

Chiselling & Trimming

Spiral Ratchet Screwdrivers

Polished chrome plated body. 3-way ratchet. Quick release chuck. Lacquered wood handle. Chrome vanadium steel bits. Supplied with crosspoint and flared screwdriver bits.
Overall length: 430mm.

Spiral Ratchet Screwdriver

Kennedy® Square Head Centre Punches

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS3066.

125mm (5") Overall Length

'Hi-Grip' Screwdrivers

Supplied in clear plastic wallet. Contents: Flared; 6.5 Stubby, 6.5 x 100, 6.5 x 150 & 10.0 x 250mm. Crosspoint; No 1 x 75, No 2 Stubby, No 2 x 100 & No 3 x 150mm.

8 Piece Set

Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Tri-Wing

Kennedy Rotary Chemical Dispensing Pump

An easy to operate manual rotary chemical pump that is used to dispense chemicals from a bulk drum into a suitable container. Designed for use with fluids which a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. All seals are from Vitron rubber and all hardware is stainless steel. Strainer fitted at the suction tube inlet stops contaminants from entering the pump. Complete with threaded polypropylene suction tube and a choice of 2" bung adaptors for use on both plastic and metal drums of capacities 15 gallons (50 litres) and 55 gallons (205 litres). For use with water-based fluids, antifreeze, acids, chemicals etc., in addition to all petroleum-based products. Delivery 5 litres (1.3gal. per 20 turns of the handle). Weight 3kg.

DO NOT USE with Acetone, Lacquer, Mineral Oils, Solvents or Turpentine.

Body Repair Kit Spares

Spares for hydraulic hand pumps

Extension Tubes

Long Extension Tube for collision repair kits