Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 20ft

Body Repair Kit Spares

Spares for hydraulic hand pumps

Double Ended Male Snap Connector

For Collision Repair Kit

Hammer Shafts

Made from genuine hickory with a waxed finish. Manufactured to BS 3823.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy® Butane Soldering Tool Kit

Supplied in robust plastic case.
Contents:
BS075 butane soldering iron, tip cleaning sponge, eight interchangeable tips: 2.4mm single flat, 1, 2.4, 3.2, 4.8 double flat, hot air blower, hot knife and hot air deflector.

Jewellers' & Watchmakers' Tool Sets

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.

6 Piece with Nickel Chrome Molybdenum Alloy Steel Blades

Contents: Parallel: 1.0, 1.4, 2.0, 2.4, 3.0 & 3.8mm.

Cross Pein Hammers

Traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to "driving home" with the flat faced pein.

Warrington Hardwood Shaft

Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face.

Scutch Bit Holders, Combs & Droves

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Scutch Holders - Carbon Steel

Designed to hold a detachable stone dressing comb or drove. The tool is then used to dress stone and brickwork. It has also proved very effective when fitted with a scutch comb for cutting into bricks and blockwork to fit socket boxes. The size of the holder should be the same as the comb or drove being used.

Kennedy® Standard Wire Gauges

Manufactured from high grade tool steel with satin brushed finish. Each slot is marked with the nominal size. Two part pivoting space saving design.

Reversible Ratchet Podger Wrench

Manufactured from chrome vanadium steel. Suitable for heavy-duty construction applications. Ratchet action for use in confined spaces. Reversible head has two internal bi-hexagon sizes for flexibility in use. Lever reversible for instant direction change without removing wrench from the fastener. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.