8 Piece Butane Soldering Iron Kit

Butane soldering iron with piezo self ignition. Fully adjustable temperature control with 'safety fuel cut-off' feature when cap is replaced. Comes complete with 5 tip attachments, cleaning sponge and safety stand.

Kit contents:
1x butane soldering iron.
5x tip attachments: 2.4mm and 4.8mm double flat, hot knife, hot air blower and hot air deflector.
1x cleaning sponge.
1x safety stand.

Machinists Hammer (DIN 1041)

Machinists hammers suitable for use on metal. With hickory shaft. Manufactured to European DIN 1041 standard.

Kennedy Grip Wrenches

Kennedy grip wrench bodies are manufactured from rolled chrome vanadium steel and have drop forged hardened steel jaws with corrosion resistant bright nickel coating. The jaw opening and clamping pressure can be adjusted with the knurled head screw and is fitted with a wire spring to open the jaws automatically. The locking mechanism holds the wrench in place once adjusted, leaving both hands free and is easily disengaged by squeezing the release lever.

230mm (9") Long Nose Locking Pliers

Specially designed with long slim jaws to enable access to restricted areas. With quick release.

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Chisel and V-Notch Wrecking Bars

Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever

Industrial Flared Nut Ring Spanners

Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends.

Metric

Conform with ANSI B107.9M.

Kennedy® Standard Industrial Terminals - Yellow Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Tapered Gauges

These are called taper gauges only because of their shape. They do not measure tapers they are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered stainless steel. 0.1mm increments. Rustless. Constant at 20°C. Satin Chrome anti glare finish. Permanent black figures and graduations.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Pozidriv