Kennedy® Standard Industrial Terminals - Blue Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy Torque Wrenches

Kennedy?s fixed torque wrenches have been designed for use on production lines and for other applications where a specific torque is required for repetitive operations.

Fixed Head Torque Wrench

Features include:

Chrome plated, polished steel head.
Retractable torque setting lever.
CLICK & SNAP action indicates when the pre-set torque level has been reached. Four easy read scales N.m, kgf.m, lbf.in x10, lbf.ft
Push through square drive connector to instantly reverse action.
Knurled grip plastic handle.
Complete with factory tested calibration certificate, operating instructions and torque conversion chart.
Supplied in blow moulded cases, except FTW800, which is in a cardboard case.
Manufactured to ISO 6789 : 1992 (BS EN 26789 : 1994).
Accuracy plus/minus 4%.

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Universal Ball Joints

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Sizes 1/2" and above feature a hole to accommodate a pin and ring to prevent accidental removal for added security.

Groove Joint Waterpump Pliers

Chrome vanadium with a satin finish and textured grip handles.



Hardened chromed steel jaws. Sliding pivot joint allows the widest range of jaw openings. The handles cannot be closed together, preventing trapped fingers.

Aviation Tin Snips

Manufactured from the finest industrial quality drop forged chrome vanadium steel hardened to 54 - 58 Rockwell with ground cutting edges, for clean accurate cuts. The double fulcrum compound action magnifies the pressure applied by the user making it easier to cut. Spring loaded to allow easy single-handed operation. The handles are coated for improved comfort, control and have anti-slip guards for extra safety. Thumb lock ensures the jaws are closed when not in use. Suitable for use on mild steel and other non-ferrous materials. Capacity: up to 1.2mm cold rolled steel sheet.



Left Hand - Cuts left and straight.

Diesel Injector removal set Bosch/Delphi - 4 piece

Specifically designed for removing Delphi/Bosch injectors using 5/8” slide hammer.
Set of three adaptors and a special tool for removing the internal part of Bosch injectors which can be used with an air tool to loosen the injectors through vibration.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Cabinet Screwdrivers

Traditional design cabinet screwdrivers with matt grey high impact plastic handles to ensure a firm yet comfortable grip allowing constant use, giving maximum torque. Chrome alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Flared

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Kennedy® Parallel Pin Punches

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

100mm (4") Overall Length

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.