Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy® Electrical Components

These Kennedy® Terminal and crimp tool kits contain all the commonly used terminals and connectors in a variety of sizes, with a crimping tool.

Electrical terminal connectors are constructed from the highest quality materials available to ensure a good crimp and connection every time.

361 Piece Assorted Terminals and Crimping Tool Set

240mm heavy gauge hardened carbon steel wire crimper with anvil action cutters and PVC grip.
Features:
Insulation terminals: 1.5mm (red), 2.5mm (blue) and 6.0mm (yellow).
Wire cutters: M2.6, M3.0, M3.5, M4.0 and M5.0mm.
Non insulated terminals: 1.5mm, 2.5mm 4.0 - 6.0mm.
Wire strippers: 0.75, 1.0, 1.5, 2.5, 4.0 and 6.0mm.

Kit Contents:
40mm 5-Way Crimping Tool.
Blade connectors:
Red - 2.3 x 10.4mm (20pcs)
Blue - 2.8 x 9.0mm (20pcs)
Push-on spade connectors - MALE:
Red - 6.3 x 0.8mm (25pcs)
Blue - 6.3 x 0.8mm (25pcs)
Push-on spade connectors - FEMALE:
Red - 6.3 x 0.8mm (25pcs)
Blue - 6.3 x 0.8mm (25pcs)
Butt connectors:
Red - 0.5 x 1.5mm2 (10pcs)
Blue - 1.5 x 2.5mm2 (10pcs)
Bullet connectors - MALE:
Red - 4.0mm2 (20pcs)
Blue - 4.0mm2 (20pcs)
Bullet connectors - FEMALE:
Red - 4.0mm (20pcs)
Blue - 4.0mm (20pcs)
Fork connectors:
Red - 4.0mm (25pcs)
Blue - 4.0mm (25pcs)
Yellow - 4.0mm (10pcs)
Ring connectors:
Red - 4.0mm (25pcs)
Blue - 4.0mm (25pcs)
Yellow - 6.0mm (10pcs)

Long Reach Mechanical Puller - 2 Jaw

Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double ended, adjustable, reversible legs and can be used for internal and external applications. Selection. Always use a 3 jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

Industrial Reversible/Double Ended Adjustable

Electricians' Screwdrivers

Parallel tip screwdrivers with mechanics' pattern handle. Chrome vanadium blades.

10mm AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Hexagon

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Metric

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Miniature Pliers

Made from high quality chrome nickel steel with induction ground cutting edges. Double dipped PVC grips for user comfort and control. Used for delicate, fine and accurate work in a continuous production environment. Spring loaded return for quick repetitive opening and operator comfort. Spring-loaded return. For quick, repetitive work and operator comfort.

Diagonal Cutters

110mm overall length.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Pro-Torq Insulated Snipe Nose Pliers

Manufactured from specially selected steels. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. Manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Especially suitable for production line environments where repetitive work is undertaken. Double polished head and joint. Induction hardened cutting edges with serrated jaws for gripping nuts.