1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Flat

Canvas Holdall

Heavy duty water resistant. Canvas covered rope handles, fully stitched, wrap underneath bag for extra support. 3 webbed straps with metal buckles for closing, 2 of which fully wrap around the bag to give extra support.

Kennedy Combination Spanner Sets

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset. Conform to DIN 3113 & BS 192 : 1982.

Imperial (12 Pieces)

Contents:
1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8", 15/16" and 1".

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

12.7mm x 300mm

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

3/4? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Wooden Handle Speed Clamps

Manufactured from high strength ribbed girder section heat treated carbon steel for improved strength and rigidity when placed under working loads, with nickel and chrome plated corrosion resistant finish the drive screw is chemically blacked. Straight wooden handle for easy clamping. The swivel ball joint clamp foot ensures the clamping forces are applied evenly.

Kennedy® Beechwood Folding Rules Class III

Manufactured from Beechwood for strength and flexibility and painted bright yellow. Metric and inch graduations, large, clear and deep for increased tool life and easy reading.
Sizes available: 1m x 5 folds
2m x 10 folds
Graduations: Metric - mm & cm (cm figures in red)
Inch - 1/16", 1/8", 1/4", 1/2", 1"
Accuracy: Class III

'Live Line' VDE Tool Kit - 17 Piece

Supplied in heavy duty tear resistant tool roll with reinforced stitched edging. 2 metal rings for hanging on to a wall when opened. 20 pockets, 18 elasticated tool loops are stitched on the inside. A velcro fastening secures the roll when shut with a riveted carry handle on the outside.

All Pro-Torq tools have a dual material grip handle that is designed to allow the user to apply the greatest force with the minimum amount of effort, these are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.


All tools VDE approved.

Impact Extractor Sockets

Extracts rounded, seized or painted right hand threaded fasteners, the reverse spiral flutes are designed to bite into seized nuts and bolts providing greater grip for extraction. The socket bar is to drive out the fasteners from sockets, once removed.

3/8" Square Drive Impact Extractor Sockets

Kennedy Trimming Knife Blades

Kennedy Industrial quality knife blades have a superior edge hardening for longer tool life and sharper edge. Best value with longer working between blade changes.
For use on carpets and vinyl.

For use with fixed and retractable trimming knives and window scrapers. Suitable for Kennedy, Stanley, Irwin and other brands of knife.

Heavy Duty Trimming Knife Blades

Heavy duty:
For use on carpets and vinyl.
Pack of five supplied in plastic case.
Bulk pack of 100 supplied in card box.