Kennedy® Standard Industrial Terminals - Blue Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Groove Joint Waterpump Pliers

Chrome vanadium with a satin finish and textured grip handles.



Hardened chromed steel jaws. Sliding pivot joint allows the widest range of jaw openings. The handles cannot be closed together, preventing trapped fingers.

Aviation Tin Snips

Manufactured from the finest industrial quality drop forged chrome vanadium steel hardened to 54 - 58 Rockwell with ground cutting edges, for clean accurate cuts. The double fulcrum compound action magnifies the pressure applied by the user making it easier to cut. Spring loaded to allow easy single-handed operation. The handles are coated for improved comfort, control and have anti-slip guards for extra safety. Thumb lock ensures the jaws are closed when not in use. Suitable for use on mild steel and other non-ferrous materials. Capacity: up to 1.2mm cold rolled steel sheet.



Left Hand - Cuts left and straight.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Cabinet Screwdrivers

Traditional design cabinet screwdrivers with matt grey high impact plastic handles to ensure a firm yet comfortable grip allowing constant use, giving maximum torque. Chrome alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Flared

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Kennedy® Parallel Pin Punches

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

100mm (4") Overall Length

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy® Electrical Components

These Kennedy® Terminal and crimp tool kits contain all the commonly used terminals and connectors in a variety of sizes, with a crimping tool.

Electrical terminal connectors are constructed from the highest quality materials available to ensure a good crimp and connection every time.

361 Piece Assorted Terminals and Crimping Tool Set

240mm heavy gauge hardened carbon steel wire crimper with anvil action cutters and PVC grip.
Features:
Insulation terminals: 1.5mm (red), 2.5mm (blue) and 6.0mm (yellow).
Wire cutters: M2.6, M3.0, M3.5, M4.0 and M5.0mm.
Non insulated terminals: 1.5mm, 2.5mm 4.0 - 6.0mm.
Wire strippers: 0.75, 1.0, 1.5, 2.5, 4.0 and 6.0mm.

Kit Contents:
40mm 5-Way Crimping Tool.
Blade connectors:
Red - 2.3 x 10.4mm (20pcs)
Blue - 2.8 x 9.0mm (20pcs)
Push-on spade connectors - MALE:
Red - 6.3 x 0.8mm (25pcs)
Blue - 6.3 x 0.8mm (25pcs)
Push-on spade connectors - FEMALE:
Red - 6.3 x 0.8mm (25pcs)
Blue - 6.3 x 0.8mm (25pcs)
Butt connectors:
Red - 0.5 x 1.5mm2 (10pcs)
Blue - 1.5 x 2.5mm2 (10pcs)
Bullet connectors - MALE:
Red - 4.0mm2 (20pcs)
Blue - 4.0mm2 (20pcs)
Bullet connectors - FEMALE:
Red - 4.0mm (20pcs)
Blue - 4.0mm (20pcs)
Fork connectors:
Red - 4.0mm (25pcs)
Blue - 4.0mm (25pcs)
Yellow - 4.0mm (10pcs)
Ring connectors:
Red - 4.0mm (25pcs)
Blue - 4.0mm (25pcs)
Yellow - 6.0mm (10pcs)

Long Reach Mechanical Puller - 2 Jaw

Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double ended, adjustable, reversible legs and can be used for internal and external applications. Selection. Always use a 3 jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

Industrial Reversible/Double Ended Adjustable