Kennedy Crowbars, Wrecking bars and Pry bars

Manufactured from carbon steel. These traditional designs are used by tradesmen in all industrial environments. Suitable for a wide range of general duty applications, ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar). Also used in assembly applications offering safe leverage and alignment capability.

Line Type Pry Bar Set (2 Piece)

The Line angled blade provides greater leverage, ground points used by Steel Erectors & Scaffolders for aligning bolt or rivet holes.

2 piece set contains:
1x 400mm.
1x 600mm.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

1/2? Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Kennedy Automotive Battery & Electrical System Tools

For fast, simple and strong splicing of automotive electrical wires.
Easy-to-use, no wire strippers or crimper required.

Maximum electrical rating: 600 Volts
Maximum temperature: 105C
Terminal material: Brass
Plating: Tin
Insulation material: PP

Quick Automotive Wire Splicing Set 50 pieces

Contents:
Red: 0.5mm2 x 1.0mm2 (25pcs)
Blue: 1.5mm2 x 2.5mm2 (25pcs)

Kennedy Low Profile Trolley Jacks

Kennedy Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy 2 Tonne Low Profile Service Trolley Jack

Kennedy 2 Tonne Low Profile Service Trolley Jack is convenient and easy to use due to it"s compact design. It has a strong, robust steel chassis to provide stability when under load. A low entry height of 89mm. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The removable one piece pump handle can rotate 360 degrees and has a comfort rubber grip to rapidly raise and lower the load arm and the vehicle.

Model number: T359L
Maximum load: 2 tonnes
Minimum height: 89mm
Maximum height: 359mm
Weight: 14.5kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy Plastic Toolboxes

The Kennedy TTO480 tool box is manufactured from impact resistant high-density plastic. It is supplied complete with an internal eight compartment tote tray with retractable carry handle and a 16-compartment small parts organiser.

TTO480 480mm (19'') Plastic Tool Box with Tote Tray & Organiser

Features include:
Small parts organiser with transparent lid.
Metric rule on the lid, lid locking clasps and sturdy plastic handle that also locks lid shut when lifting.
Tote tray with retractable handle
Padlock hole .
Overall Dimensions: 480x240x260mm (LxWxH).

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

3/4? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Kennedy® Edge & Centre Finder - 5 Piece Set

Consists of a chuck body and four contact arms. Designed to check 'run-out' or concentricity, straightness and alignment. Will indicate the position of a datum point on a component or fixture from the centre line of a machine spindle. Suitable for use on drill presses, lathes, milling machines, borers etc.

Ground, hardened and polished contact arms, for accurate location.
Quick change "snap fit" contact arms and body.
Fast, effective way of locating working centres.
Unique universal indicator holder.

Overall Packaging dimensions: 124(W) x 14(D) x 135(H)mm.

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Flat Chisel

Used by the engineering and building trades for cutting and chipping cold metals, brick work and stone. The angle of the cut edge should be 60 - 70, inclusive, but is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Hammer Shafts

Made from genuine hickory with a waxed finish. Manufactured to BS 3823.