Kennedy® Standard Industrial Terminals - Blue Female Socket

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy Service Engineers' Tool Kit

Suitable for use by the service engineer, the electrician and tradesman. All the Kennedy industrial quality tools carry a quality guarantee.

102 Piece Service Engineer's Tool Kit

Contents:
Hi-impact mobile tool case.
6 piece 16cm cut 2 needle file set.
150mm chrome finish adjustable wrench.
150mm mains tester range 125/250V.
Insulation tape.
Soldering iron 25W 240V.
Cable stripping knife.
Desoldering gun.
17gm 1.0mm dia 60/40 cored solder.
Square head centre punch 3.2 x 100mm.
150mm/6" flexible rustless rule.
Precision tweezers: 115mm sharp nose, 120mm flat blade.
Eye loupe.
30mm dia. telescopic inspection mirror (handle expands to 480mm).
225g (1/2lb) ball pein hammer.
7.5m/25ft steel tape.
13 segment blade mini autolock retractable knife.
Junior hacksaw frame c/w hardened blade.
10 junior hacksaw blades for metal.
215mm plastic handle scissors.
Magnetic pick up tool.
160mm snipe nose plier.
160mm diagonal cutting nipper.
160mm combination plier with side cutter.
150mm insulation and wire stripping plier.
115mm precision flat nose pliers.
115mm precision long nose pliers.
115mm precision nippers.
115mm precision end cutting nippers.
Pro-torq grip screwdrivers with chrome vanadium blade: Slotted 100 x 6mm.
Crosspoint 76mm x No.0 and No.1, 6mm x No.2.
Supadriv 76mm x No.0 and 1, 100mm x No.2.
Electricians: Parallel 150 and 200 x 5mm.
Offset screwdrivers: 5mm x No.1, 6mm x No. 2.
1000v VDU insulated screwdrivers: parallel 4 x 100mm slotted 5.5 x 125mm.
Torx screwdrivers: T6, T8 and T10. 11 piece screwdriver and tool set: Parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm, Crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
7 piece electronic screwdriver set: Parallel 1.4, 2, 2.4 and 3mm, Crosspoint PHO-3, PHO-2 and PH0.
6 piece chrome vanadium steel 0-11 BA open ended spanner set. 20mm diameter sash tool.
9 piece hex key set 1.5-10mm.
Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

Kennedy® Button Magnets

A horse shoe type cylindrical magnet. Opposing poles are at the same end of the magnet separated by a slot. Supplied with a plain bore and keeper. Permanently magnetic. Can be used in temperatures up to 550C.

Pro-Torq Miniature Pliers

The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Made from high quality chrome nickel steel with induction ground cutting edges. Used for delicate, fine and accurate work in a continuous production environment. Spring-loaded return.
For quick, repetitive work and operator comfort.

Flat Nose

130mm overall length.

Finishing Picks

Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.

Round Pick and Finishing Panel Beater

Medium weight with crowned face designed to remove high spots.

Light Duty Cable Cutters

For cutting copper cable, plastic pipe, wooden dowels, rope cord and similar materials up to 10mm diameter. Precision ground and hardened stainless steel blades - HRC 5054. Lightweight polypropylene handles with spring loaded action, easy reach thumb catch convenient for right and left hand users. Overall length: 165mm (61/2"). Cutting capacity: 10mm (3/8").

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Hickory Shaft BS 876

Tested to the requirements of BS 876: 1981 (head stamped BS 876).

'Hi-Grip' Screwdrivers

Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Flared

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.