8-Piece Pro-Torq Hex Wrench Set

Keeps all sizes together and readily available. Conveniently folds up to a handy pocket size with penknife type storage. Sizes: T9 - T40. Dimensions (W x D x H): 40 x 22 x 115mm.

Traditional Engineers' Wrenches

With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529.
Square size: 5.3 - 17.0

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

A/F

Artist Brushes

Plastic handle with pure bristles. Each brush is marked with
its size.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Pneumatic Brake & Clutch Bleeder

PBB100
Single man operated pneumatic bleeder which simplifies the bleeding of hydraulic fluid in vehicle clutches and brake systems, also used for the collection of other non-corrosive fluid spillage.
Has a 1ltr container with a 1/4 " NPT connection, operates from 90-145psi (6-10bar) air pressure with an air compsumption rate of 180ltr/min an extraction rate of 1.6ltr/min and vacuum (maximum) 550mm HG. Handles non-flammable liquids between 0 & 80C.

Kennedy 1000mm/40" Girder Section Spirit Level

Industrial quality with three factory set vials, horizontal and 2 plumb, aluminium body with powder coat finish. Accuracy: 0.75mm/m. Top face marked with metric and imperial graduations.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Metric

Hydraulic Grease Nipples

45 Type



For use with Kennedy grease guns and all other hydraulic grease equipment.

Kennedy Torque Wrenches

Kennedy 3/8?? square drive fixed head torque wrenches have a high quality chrome plated, polished steel head and retractable torque setting lever. A CLICK & SNAP? action indicates when the pre-set torque level has been reached.

Four easy read scales N.m, kgf.m, lbf.in x10, lbf.ft. Push through square drive connector to instantly reverse action. Knurled grip plastic handle.

Complete with factory tested calibration certificate, operating instructions and torque conversion chart. Supplied in blow moulded cases, except FTW800, which is in a cardboard case.

Manufactured to ISO 6789: 1992 (BS EN 26789: 1994).
Accuracy: plus/minus 4%.

3/8?? Square Drive Fixed Head Torque Wrenches