Sash Clamps & Lengthening Bar

Used for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel and the main screw and handles are made from high grade steel. The tail slides are secured by a solid steel pin. Also available are lengthening bars, which increase the bar length.

136

Same as No. 135, but with a "T" section bar for extra resilience (as high as 1.9 tons). The fixed head can be bench mounted.

Bolt Cutters

Used for cutting a range of materials from concrete reinforcing rod to single strand low tensile wire. Available in a range of head styles for a wide range of applications. Drop forged steel handles and jaws, heat treated for greater hardness. The heads are available in a range of cutting types. Centre cut for general purpose. Clipper cut for close cropping, end cut and angle cut for close cutting in confined spaces. (*with cam adjustment).

Centre Cut - High Tensile

Used for cutting concrete reinforcing rod, reinforcing wire, high tensile steel rod and bar, case hardened chain, cold drawn alloy steel and tempered steel wire. With a tensile strength up to 112 tons/in - 1729 N/mm.

120 General Purpose Clamps

General-purpose suitable for both wood and metal-working applications. Manufactured from cast SG ductile iron, for strength and rigidity.

Sash Clamps & Lengthening Bar

Used for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel and the main screw and handles are made from high grade steel. The tail slides are secured by a solid steel pin. Also available are lengthening bars, which increase the bar length.

135

Heavy duty clamp with a 32 x 6mm (1 1/4 " x 1/4 ") bar section. The slides and heads are flat bottomed to stand without support.

Bench Plane

The Record range of bench planes is manufactured to uncompromisingly high standards. The planes feature tungsten vanadium cutter blade, accurately machined blade setting, full adjustments, selected hardwood handle and knob, cast iron base frog and lever cap. With machined cast fine grained iron bodies, and traditional brass adjusting nut.

No. 4 Smoothing Plane

Used for smoothing and final finishing. Featuring a robust level cap designed to lock down on three points for secure location of the cutting iron. Razor sharp tungsten vanadium steel cutting iron to cut even the hardest of woods and is precision machined to lay flat on the frog face and eliminate chatter. Impact resistant ABS resin handle and knob for comfort and control. Traditional adjusting nut for fine seating. The cast iron fine grained body and frog are CNC machined to 0.04mm accuracy with a precision machine-filed mouth. Length: 245mm, Blade width: 50mm

Sash Clamps & Lengthening Bar

Used for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel and the main screw and handles are made from high grade steel. The tail slides are secured by a solid steel pin. Also available are lengthening bars, which increase the bar length.

136

Same as No. 135, but with a "T" section bar for extra resilience (as high as 1.9 tons). The fixed head can be bench mounted.

Bolt Cutters

Used for cutting a range of materials from concrete reinforcing rod to single strand low tensile wire. Available in a range of head styles for a wide range of applications. Drop forged steel handles and jaws, heat treated for greater hardness. The heads are available in a range of cutting types. Centre cut for general purpose. Clipper cut for close cropping, end cut and angle cut for close cutting in confined spaces. (*with cam adjustment).

Centre Cut - High Tensile

Used for cutting concrete reinforcing rod, reinforcing wire, high tensile steel rod and bar, case hardened chain, cold drawn alloy steel and tempered steel wire. With a tensile strength up to 112 tons/in - 1729 N/mm.

Sash Clamps & Lengthening Bar

Used for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel and the main screw and handles are made from high grade steel. The tail slides are secured by a solid steel pin. Also available are lengthening bars, which increase the bar length.

135

Heavy duty clamp with a 32 x 6mm (1 1/4 " x 1/4 ") bar section. The slides and heads are flat bottomed to stand without support.

Hinged Pipe Vice

Used for repetitive pipe work, the top jaw is held in position with a hook, which automatically engages when the vice is closed. SG ductile cast iron frame with steel handle screw and jaws.

Bolt Cutters

Used for cutting a range of materials from concrete reinforcing rod to single strand low tensile wire. Available in a range of head styles for a wide range of applications. Drop forged steel handles and jaws, heat treated for greater hardness. The heads are available in a range of cutting types. Centre cut for general purpose. Clipper cut for close cropping, end cut and angle cut for close cutting in confined spaces. (*with cam adjustment).

Centre Cut - High Tensile

Used for cutting concrete reinforcing rod, reinforcing wire, high tensile steel rod and bar, case hardened chain, cold drawn alloy steel and tempered steel wire. With a tensile strength up to 112 tons/in - 1729 N/mm.