Replacement case for YMT-582-7994K Socket Set

Contents not included

Wobble Extension

Chrome finish.

Yamoto Roller Tool Cabinets

Steel panels with two wall construction side panels and welded joints for added rigidity. Hard wearing epoxy powder coating. Solid one piece I-beam drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 100mm rubber castors with brakes fitted to two. Overall dimensions: 860 x 690 x 460mm. Castors are rated to 40kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded, and when moved should only ever be pushed. Uses 16" drawer slides.

7 Drawer Roller Tool Cabinet

Overall dimensions (W x D x H): 690 x 460 x 850mm.
Drawer sizes (W x D x H):
590 x 410 x 50mm (4).
590 x 410 x 100mm (2).
590 x 410 x 200mm (1).

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

A/F

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric

1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conforms to DIN standards. Bit length: 20mm.
Overall length: 55mm.
except * 65mm or 70mm.

Hexagon

Quick Release Ratchet Handle

With thumb lever for reversing without having to remove the socket or accessory. Highly polished chrome vanadium with rubber grip. Overall length: 250mm.

Yamoto 3/8" Square Drive Socket and Bit Set

Used in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important on this type of production.

Metric Standard & Deep Sockets with Screwdriver bits (55 Pieces)

Manufactured from industrial quality chrome vanadium steel with high polished corrosion resistant finish. The high ratio strength to weight ratio ensures the reliability and accessibility that is necessary for use in the automotive, assembly, service and maintenance industries. The bi-hexagonal design allows a higher torque to be applied and will not round off existing nuts. Sockets manufactured to: ANSI B107.5M:1987. Accessories manufactured to: ANSI B107.10M:1982.

Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22mm.
Deep Sockets: 10, 11, 12, 13, 14, 15, 17, 19 and 22mm.
Spark plug sockets: M10 and M14.
Screwdriver Bits: Crosspoint: No.1, 2 and 3, Slotted: 5 and 6mm, Hex: 3, 4, 5, 6, 8 and 10mm, Torx: T10, T15, T20, T30, T40 and T50.

Accessories:
Extension bars: 75, 150 and 250mm, U-joint, hex bit coupler, T-handle, 240mm swivel handle, spinner handle, quick release flick lever ratchet with rubber grip.

What "Car Mechanic" magazine say..."Recommended"

"A slightly different take on the Best Buy (YMT-582-6200K). The quality's just as good, but the socket count drops to 28. Instead, Yamoto provide no less than 18 bits catering for most popular screw, pozi, phillips, torx, and hex bolts. They also add an extra extension piece that sports a screwdriver style handle at one end. As before, the sockets are well made and thin walled."

What "Practical Classics" magazine say..."We Also Like"
"Same price as the Best Buy (YMT-582-6200K) and a very similar set. Main difference is that 18 screwdriver Phillips/Pzi/Torx/hex bits have replaced the AF sockets. There's also another long extension bar, which features a screwdriver-style grip. As before, there's a UJ, tommy bar and swivel-headed breaker bar included, and the sockets are tough despite being some of the slimmest here."

1/2" Square Drive Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industries. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric