Industrial Combination Spanners

Manufactured form industrial quality chrome vanadium steel, polished and hardened jaws and bi-hexagon ring with satin finish body, corrosion resistant. The open-ended jaws are offset at 15 angle for positive torque application and easier location on the fastener. Suitable for automotive, maintenance and engineering applications. Conform to ASME B107.9M 1994

Standard Extensions

Chrome finish.

Screwdriver Bits

All have ball retaining groove on each face of the square drive. For insertion/removal of fasteners and fixings using 3/8" square drive tooling. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Torx

1/2" Square Drive Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industries. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Whitworth

Yamoto Industrial Combination Spanners

Yamoto combination spanners are manufactured from chrome vanadium steel and have a polished head with a 15 offset.

Conform to ASME B107.9M 1994.

6-19mm (14 Piece) Metric Combination Spanner Set

Contents:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
Supplied in tool storage roll.

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

AF Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

Mechanics Screwdrivers

Featuring a classic slimline design favoured by the automotive industry. Black high impact plastic handles. Chrome finish alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. Flat blades have hexagon bolster to allow extra torque to be applied using a spanner.

Pozidriv

Yamoto Roller Tool Cabinets

Steel panels with two wall construction side panels and welded joints for added rigidity. Hard wearing epoxy powder coating. Solid one piece I-beam drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 100mm rubber castors with brakes fitted to two. Overall dimensions: 860 x 690 x 460mm. Castors are rated to 40kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded, and when moved should only ever be pushed. Uses 16" drawer slides.

3 Drawer Roller Tool Cabinet

Overall dimensions (W x D x H): 690 x 460 x 850mm.
Drawer sizes (W x D x H): 590 x 410 x 100mm (3).
Bottom compartment (W x D x H): 610 x 430 x 355mm.

1/2" Square Drive Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industries. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric

Screwdriver Bits

All have ball retaining groove on each face of the square drive. For insertion/removal of fasteners and fixings using 3/8" square drive tooling. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Torx