Greaseless Lubricant

Multi-purpose lubricant that prevents electrical and electronic failures caused by water penetration, humidity, condensation or rust.
Size: 400ml.

40 Protective Lubricant

Suitable for protection against corrosion, water displacement, lubrication and flash rust removal.
* Quickly frees seized nuts, bolts and bearings
* High corrosion protection and water displacement properties - Passes IP 178, Methods A and B
* Remains operational at sub-zero temperatures
* Non conductive film
* Safe on most paints, rubbers and plastics
* Rolls Royce Approved 1036J
*Treated metals resist finger printing and remain bright even in highly corrosive conditions.

Ambersil Mould Cleaner 5L

Cleaner for Mould Tools and Dies. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based release agents. Evaporates to leave a clean, dry surface with no residues. Special formulation permits use on hot production tooling without excessive solvent loss by evaporation.
Size: 5L.

N.B. Picture illustrates 400ml aerosol.

AMS4 Silicone Grease Spray

Multi-purpose silicone grease. XG250 silicone grease in easy to apply form.

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Corrosion Inhibitor

Anti-corrosion treatment. A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.



Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts. Meets MIL-PRF-16173E (Class I, Grade 2). Passes IP 178, Method B. 250 Hours minimum protection (ASTMB117) in salt spray tests.

Ambersil Amberklene FG

Heavy duty, biodegradable industrial cleaner/ degreaser. Specially designed for use on food processing and packaging equipment. Authorised for use in inedible product processing, non-processing and exterior areas. The controlled evaporation rate ensures maximum contact time with contamination. NSF C1 registered. Meets USDA 1998 C1 guidelines for use in food industry. High flash point of 40C. Neutral product, non-staining. Does not contain water. Non-corrosive to metals. May be harmful to some plastics and will soften some paints. Fitted with a 360 spray system for all angle use, even upside down. 500ml aerosol.

Ambersolv Citrus Solvent Cleaner

High performance citrus based cleaning solvent. An ideal alternative to traditional chlorinated or highly volatile solvent cleaners, suitable for use in aerospace, industrial and general engineering applications.



Natural based, high performance cleaner/degreaser. Biodegradable. Deep penetrating action. Classified as non-flammable. Effective on a wide range of soiling such as oil, grease, tar, bitumen, silicones, rubber-based adhesives, oil-based paints, inks and dyes. Meets many aerospace and industry approvals: Boeing D6-17487, Mcdonnell Douglas CSD1, Pratt & Whitney PMC 1409/1/2/3/4 (See Technical data for full listing). Safe on metals and most plastics. Multi-use by spraying, soaking, immersion, wiping or ultrasonic.

Tufcut Metal Cutting Lubricants

TUFCUT is a range of specialist metal cutting lubricants based on a mixture of lubricants, extreme pressure additives and anti-oxidants in a blend of solvents. The range has been formulated to offer instant, ready-to-use metal machining products to provide exceptional performance in demanding applications.

Dissipates heat and allows heavier close tolerance cuts.
Excellent resistance to extreme pressure prevents chip welding and extends tool life.
Handy pack sizes allows application direct to the cutting edge.
TUFCUT Liquid (bulk) can be used in automatic applicators.
Approved by Augusta Westland Helicopters for machining composite materials (TUFCUT Liquid).

TUFCUT offers outstanding performance for turning, drilling, reaming, tapping and thread cutting of tough metals such as stainless steel, high tensile, high speed and high carbon steels.

Particularly invaluable for: mould and dye makers, pattern formers, heavy engineering, plant manufacturers, metal fabricators, shipyard, docks and marine companies, metal parts manufacturers.

Tufcut Spray - 400ml

Instant ready-to-use metal cutting lubricant, for faster production and improved surface finish. A must use product where right first time results are essential.

Electronic Cleaning Solvent

Universally accepted safe solvent for the quick and efficient cleaning of delicate electrical and electronic components, in a wide variety of electronic, computing, aerospace and industrial applications. Gentle, yet highly effective alcohol based cleaner. Excellent material compatibility, safe to use on plastics and rubber. Can be used to remove moisture by forming an azeotrope - a mixture of IPA and water that evaporates quicker than water. Conforms to BS 1595, ASTM D770 and DIN 53245. Evaporates to leave a clean, dry surface. Ideal for cleaning video and audio heads, photocopier drums, optical devices, Switches and PCB’s.

Images not available for 5ltr or 25ltr

IPA