Ambersolv Citrus Solvent Cleaner

High performance citrus based cleaning solvent. An ideal alternative to traditional chlorinated or highly volatile solvent cleaners, suitable for use in aerospace, industrial and general engineering applications.



Natural based, high performance cleaner/degreaser. Biodegradable. Deep penetrating action. Classified as non-flammable. Effective on a wide range of soiling such as oil, grease, tar, bitumen, silicones, rubber-based adhesives, oil-based paints, inks and dyes. Meets many aerospace and industry approvals: Boeing D6-17487, Mcdonnell Douglas CSD1, Pratt & Whitney PMC 1409/1/2/3/4 (See Technical data for full listing). Safe on metals and most plastics. Multi-use by spraying, soaking, immersion, wiping or ultrasonic.

Heavy Duty Solvent - ME20

A highly effective, heavy-duty cleaner/degreaser. Suitable for use in all industrial, aviation, automotive and engineering applications that require a stronger degreaser with a longer contact time. Heavy-duty cleaner for extra stubborn stains and soiling. Removes heavy deposits of oil and grease, waxes and silicones. Controlled evaporation. Superior wetting properties ensures extended contact time with soiling. Leaves a clean, dry surface. Safe for use on ferrous and non-ferrous metals and some plastics. High flash point 41C.

Ambersil Mould Cleaner 5L

Cleaner for Mould Tools and Dies. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based release agents. Evaporates to leave a clean, dry surface with no residues. Special formulation permits use on hot production tooling without excessive solvent loss by evaporation.
Size: 5L.

N.B. Picture illustrates 400ml aerosol.

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Fast Drying Solvent - FE10

Powerful, fast evaporating solvent cleaner/ degreaser. Particularly suitable for use in mould cleaning during production runs. Powerful flushing action, rapidly removes grease or oils. Evaporates to leave a clean, dry surface. Safe for use on ferrous and non-ferrous metals and most plastics. Meets military specification - NATO catalogue No. 6850-99-6636478.

Ambersil Mould Cleaner 5L

Cleaner for Mould Tools and Dies. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based release agents. Evaporates to leave a clean, dry surface with no residues. Special formulation permits use on hot production tooling without excessive solvent loss by evaporation.
Size: 5L.

N.B. Picture illustrates 400ml aerosol.

Ambersil FG Penetrating Oil





NSF H1 registered penetrant for seized parts.
Frees metal parts seized by dirt,rust,corrosion or dried up greasy deposits.

40 Protective Lubricant

Suitable for protection against corrosion, water displacement, lubrication and flash rust removal.
* Quickly frees seized nuts, bolts and bearings
* High corrosion protection and water displacement properties - Passes IP 178, Methods A and B
* Remains operational at sub-zero temperatures
* Non conductive film
* Safe on most paints, rubbers and plastics
* Rolls Royce Approved 1036J
*Treated metals resist finger printing and remain bright even in highly corrosive conditions.

Ambersil Flaw Detector

Quick drying solvent cleaner/degreaser and excess
penetrant remover for the non-destructive testing of metal
surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid
penetrant inspection and to remove all visible, colored traces of the penetrant.

Ambersil Flaw Detector Penetrant No.2

Ambersil Fast Clean 200 Spray

F200
Super fast degreaser. An ideal alternative to chlorinated solvents. High degreasing power. Very fast drying time. Leaves no residue. Safe on all metals. Excellent spot remover for textile trade.
Size: 400ml aerosol.