Ambersil Label & Adhesive Remover FG

For fast and effective removal of self-adhesive labels that quickly breaks down adhesive residues. Also an effective cleaner for the removal of some inks and dyes and is safe on most surfaces.
• NSF K3 registered (N° 140259) for use in the food industry.
• Removes adhesives and paper labels in 3 minutes.
• Particularly effective in removing shipping labels on pallets.
• Good material compatibility (always test prior to application).

Ambersil Silicone Mould Release Agents

Easy and economical to use, enhances surface finishes on mouldings and increases output by reducing rejects. Operational up to 200C.

One/2 Heavy duty

For difficult mouldings.

Ambersil Moisture Remover FG

Developed for the food industry to remove moisture from equipment, bearings and electronics.
A blend of mineral oils and innovative solvents quickly drive out moisture from treated parts, leaving behind a thin, protective film, combating corrosion.
NSF H2 registered (No.142299).

Tufcut Metal Cutting Lubricants

TUFCUT is a range of specialist metal cutting lubricants based on a mixture of lubricants, extreme pressure additives and anti-oxidants in a blend of solvents. The range has been formulated to offer instant, ready-to-use metal machining products to provide exceptional performance in demanding applications.

Dissipates heat and allows heavier close tolerance cuts.
Excellent resistance to extreme pressure prevents chip welding and extends tool life.
Handy pack sizes allows application direct to the cutting edge.
TUFCUT Liquid (bulk) can be used in automatic applicators.
Approved by Augusta Westland Helicopters for machining composite materials (TUFCUT Liquid).

TUFCUT offers outstanding performance for turning, drilling, reaming, tapping and thread cutting of tough metals such as stainless steel, high tensile, high speed and high carbon steels.

Particularly invaluable for: mould and dye makers, pattern formers, heavy engineering, plant manufacturers, metal fabricators, shipyard, docks and marine companies, metal parts manufacturers.

Tufcut Liquid - 5 Litre

Dissipates heat and allows heavier close tolerance cuts. Excellent resistance to extreme pressure prevents chip welding and extends tool life. Excellent results across a wide range of metals including stainless steel, high tensile steel, high speed and high carbon steels. Ideal for turning, drilling, reaming, tapping and thread cutting. Can be used in automatic applicators.
Size: 5ltr.

Ambersil Leak Detector

Water based formulation, no oils, silicones or harmful solvents; no run-off hazard.
Non-flammable and completely odourless.
Highlights all leaks even under low pressure.
Stable, does not break down in use.
Removes the need for sophisticated electronic equipment or immersion tanks.
Fitted with 360 degree spray system for all angle use.
Aerosol meets DIN 30657.
Aerosol meets the requirements of BS EN 14291:2004.
Can be used on oxygen systems.

Ambersil Flaw Detector

Quick drying solvent cleaner/degreaser and excess
penetrant remover for the non-destructive testing of metal
surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid
penetrant inspection and to remove all visible, colored traces of the penetrant.

Ambersil Flaw Detector Penetrant No.2

40 Protective Lubricant

Suitable for protection against corrosion, water displacement, lubrication and flash rust removal.
* Quickly frees seized nuts, bolts and bearings
* High corrosion protection and water displacement properties - Passes IP 178, Methods A and B
* Remains operational at sub-zero temperatures
* Non conductive film
* Safe on most paints, rubbers and plastics
* Rolls Royce Approved 1036J
*Treated metals resist finger printing and remain bright even in highly corrosive conditions.

Ambersil Mould Cleaner 5L

Cleaner for Mould Tools and Dies. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based release agents. Evaporates to leave a clean, dry surface with no residues. Special formulation permits use on hot production tooling without excessive solvent loss by evaporation.
Size: 5L.

N.B. Picture illustrates 400ml aerosol.

Ambersil Stainless Steel Cleaner FG

Water-based, foaming cleaner for degreasing and cleaning of stainless steel surfaces. Registered NSF C1 (No.138212) for use in the food industry. Eliminates fingerprints, watermarks, dust and dirt from stainless steel. Provides metal surfaces with a long term protective coating which inhibits staining and contamination. Fitted with a 360 spray system for all angle use, even upside down. Suitable for cleaning and protection of metal surfaces against staining and contamination. 500ml aerosol.

Silicone FG Aerosol

The highly versatile, noncorrosive formula lubricates, protects, waterproofs and restores a wide range of parts
and equipment. Ensures superior lubrication of plastics and provides excellent separation and release properties. Protects metals, plastics, rubbers and other surfaces, and eliminates squeaking, binding and sticking. Fitted with a 360° spray system for all angle use, even upside down
Size: 400ml.