Ambersil Rust Flush

Penetrating spray with freezing action engineered for convenience and performance. An advanced formulation based on the laws of thermo-dynamics which rapidly freezes rust down to -40°C causing micro fissures to form the rust layer. The micro fissures ensure the active penetrating ingredients get to work deep into the thread and allow the fastener to be removed up to 10x faster than ordinary penetrating formulations.

Ambersil Flaw Detector

Quick drying solvent cleaner/degreaser and excess
penetrant remover for the non-destructive testing of metal
surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid
penetrant inspection and to remove all visible, colored traces of the penetrant.

Ambersil Flaw Detector Cleaner No.1

FG Industrial Degreaser

Dissolves and removes greases, oils, lubricants, adhesives and contaminants from equipment, machinery, motors and metal parts. Specially formulated for degreasing electric motors. Non-corrosive and non-staining. Aerosol fitted with a 360° Spray System for all angle use, even upside down.

Ambersil Inox 200 Protective Spray

Protective coating for stainless steel, based on a high performance resin and stainless steel pigments. Excellent adherence and lustre look of stainless steel.
Size: 400ml aerosol.

Ambersil Formula 1/HT Silicone
Mould Release Agent

FORMULA ONE is a high temperature, heavy duty, silicone mould release agent. It is based on silicones dissolved in a blend of solvents and has been formulated for injection moulding, but is also highly effective for use in a wide range of other moulding processes. Operational to 288C continuous, and 300C intermittent.
APPLICATIONS
Provides a heavy duty film for release of difficult plastic and rubber parts in injection moulding, compression moulding, vacuum forming and many other moulding and forming processes. Will not build up in the mould and helps to improve surface finish, reduce rejects and increase production. Also useful as an anti-stick agent in the food, textiles, sewing, foam converting, printing and shoe industries.
N.B. Contains silicone so may be unsuitable where decorative work (e.g. painting, plating) is necessary on the moulded part. Spray a light, even coating from 9" - 12" (25 - 30 cm) and re-apply as necessary.

Ambersil Non Silicone Mould Release Agents for Thermosetting Plastics

Dry film for polyurethane, epoxy resins and polyesters. Will not stain or mark the moulding. Operational up to 180C.

Ten/2

Gear & Wire Rope Lubricant

A fast drying, high solids, high penetrating lubricant that forms a tough, durable barrier against corrosion, abrasion, dust absorption, water wash off and extremes of temperature.
Suitable for use on gears in motion.
Size: 400ml

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Ambersil Flaw Detector

Quick drying solvent cleaner/degreaser and excess
penetrant remover for the non-destructive testing of metal
surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid
penetrant inspection and to remove all visible, colored traces of the penetrant.

Ambersil Flaw Detector Developer No.3

Copper Anti-Seize Paste PF

High temperature anti-seize lubricant. A soft, copper-coloured paste, based on micronised copper powder and synergistic anti-oxydant, anti-corrosion and anti-wear additives suspended in a premium grade stable oil. It is an effective anti-seize formulation, preventing metal-to-metal contact, seizing, galling, and fretting corrosion.

Reduces friction and wear, even when the base oil has already evaporated.
High pressure and high temperature resistance.
Ensures accurate assembly.
Enables easy disassembly of threaded parts, gaskets and flanges, even after long operational periods.
Threaded parts remain in good condition and can be re-used.
Separating film ensures favourable release behaviour of the threaded connections.
Excellent sealing even in corrosive atmospheres.
Resistant to hot and cold water.
Lead and nickel free.
Aerosol formulation does not contain chlorinated solvents and uses hydrocarbon propellant.