Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 25ft

Kennedy® Coaxial Crimp Tool

Coaxial crimp tool with full cycle ratcheting crimp frame and adjustable crimp pressure. Carbon steel jaws with a chemically blacked finish and PVC handles. Suitable for RG cable: 6, 58, 59 and 62. Hexagonal crimp of 1.72, 2.5, 5.4, 6.48 and 8.22mm.

Model TCC 008

3/8" Square Drive Bi-Hexagon Sockets

Chrome vanadium. Bi-hexagon. (12 point). All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all 3/8" drive accessories.

Metric Deep

Senator® Combination Spanners

Senator® combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15° open jaw angle to shank and Bi-hexagonal ring end offset. Conform to ASME B107.6.

Combination Spanner Set 6-19mm (14 Piece)

Each combination spanner in this fourteen piece set is manufactured from industrial quality chrome vanadium steel with a corrosion resistant satin finish body and polished head. The open jaws are cranked at 15° and the Bi-hexagonal drive ring drive end is offset, to improve contact and make positioning the spanner on the fastener being tightened or loosened easier.

Contents:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.

Fatmax® Ratchet Adjustable Wrenches

Ratchet jaw eliminates the need to break from the fastener. Forged CrV construction. Patented design. Available in 150mm (6"), 250mm (10") and 300mm (12") sizes.



Ratchet jaw eliminates the need to break from the fastener. Forged CrV construction. Patented design.
Available in 150mm (6"), 200mm (8"), 250mm (10") and 300mm (12") sizes.

Yamoto? Roller Cabinets and Tool Chests

The Yamoto? workshop tool storage range contains tool chests and roller cabinets that are ideal suitable for any workshop or garage. Manufactured from heavy gauge steel and finished with a corrosion resistant epoxy powder coating.

7 Drawer Roller Cabinet

The Yamoto? 7 drawer roller cabinet is ideal for storing tools in the workshop fitted with large heavy duty casters that allow the cabinet to be relocated as required.

Features:
Ribbed back panel for extra rigidity.
Epoxy powder coated finish in yellow/grey with chrome finished PVC drawer pulls.
Fully opening drawers for extra accessibility.
Quick release smooth running 350mm ball bearing drawer slides. Supplied with rubber top mat and foam drawer liners.
Fully locking.
Four hard wearing heavy duty castors, 2 swivel castors fitted with brake.
Strong 450mm wide handle.
Drawer loads should be evenly distributed.

Colour: Yellow with grey drawer fronts.

Overall dimensions (WxDxH): 755x530x860mm.
Drawer sizes (WxDxH):
4 Drawers 590x409x49mm.
2 Drawers 590x409x101mm.
1 Drawers 590x409x206mm.
Weight: 48.9Kgs
(The maximum product weight, including contents must not exceed 160kg).

KENNEDY PROFESSIONAL BI-MATERIAL FILE HANDLES

These file handles have a polypropylene base with integral hanging hole, covered with a ribbed rubber grip for comfort and increased purchase.
Available in thre sizes:
Size O.
Size 1.
Size 2.

Rutland™ Planting & Weeding Tools

Hammered epoxy coated carbon steel blade. Varnished wooden handle. 290 x 63mm

Carbon Steel Forks & Trowels

1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Registered Design No. 2053516UK. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 55mm. Bit length: 17mm. Conforms to DIN standards.

Torx

Mini Screwdrivers

Extra light duty screwdriver with magnetic tips. Designed for use on terminals and other electrical work.
N.B. Do not use on live circuits.

Mini Screwdriver Set

Contents; Crosspoint - No.0 x 65mm Parallel - 3.0 x 65mm, 3.0 x 100mm