Kennedy Pro Torq Dual Grip Pliers & Nippers

Kennedy Pro Torq Dual Grip Pliers & Nippers are manufactured from specially selected chrome vanadium steels. The dual material grip design that covers the chrome vanadium steel handle, allows the user to apply the greatest force with the minimum amount of effort. The grip is manufactured with a polypropylene core for strength & durability with a soft thermoplastic outer for a non-slip comfort grip. Especially suitable for production line environments where repetitive work is undertaken.

Pro-Torq Nipper & Plier Set - 4 Piece

This Kennedy Pro-Torq plier set is made up of the most popular types of pliers. All the pliers have double polished heads and joints with induction hardened cutting edges for a long service life.

Groove water pump joint pliers 265mm (10 1/2''): with seven jaw positions to give positive grip on nuts and pipes.

Snipe nose pliers 215mm (8 1/2''): with serrated jaws, tapered to work in confined spaces. Capable of gripping and manoeuvring small objects in confined areas.

Diagonal nippers 165mm (6 1/2''): for cutting wire. The cutting edge is set at a slight angle to the handles, this allows you to cut close to a flat surface, and leave the hand clear of any obstructions.

Combination pliers 200mm (8''): are able to grip and cut. They are often referred to as engineers' pliers, or if the handle is insulated electricians' pliers. The jaws are serrated for gripping flat surfaces and the rounded section in the jaws are for gripping nuts, tubes and pipes. The cutter is positioned behind the gripping section of the jaw.

Scutch Hammer - Hickory Shaft

Double bit type. Suitable for dressing brick & stone work prior to rendering. Replaceable plain and comb style bits.



With fine grain, forged steel head, hardened & tempered with polished faces.

Engineers' & Electricians' Screwdrivers

Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

Crosspoint

Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications.

Drawers/Dividers for Senator® Small Parts Storage Cabinet Range

Drawers:
Small: (H)36.5 x (W)54 x (L)140mm
Medium: (H)59 x (W)140 x (L)140mm
Large: (H)59 x (W)280 x (L)140mm

Dividers:
Small: 50 x 29mm (Pk 10)
Medium/Large: 133 x 50mm (Pk 5)

60 Drawer Small Parts Storage Cabinet shown for illustration purposes only (SEN-593-5220K)

Single Hexagon Sockets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. 6 point - offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket.

Single Hexagon Sockets

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

1/2? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

T-Handle Clamps

Manufactured from high strength ribbed girder section heat treated carbon steel for improved strength and rigidity when placed under working loads, with nickel and chrome plated corrosion resistant finish the drive screw and T-bar are chemically blacked. Sliding T-handle for easy clamping. The swivel ball joint clamp foot ensures the clamping forces are applied evenly.

Kennedy Driver Style Torx Keys

Screwdriver handle style wrenches. Suitable for all applications but particularly favoured for use when replacing shims and inserts on replaceable tipped carbide tooling. Also favoured be the electronics industry. Made from chrome molybdenum steel. Each driver is marked with size. Torx is a registered trademark of Camcar/Textron.

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric