Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

A/F

Edge & Centre Finders

Much time and trouble is taken in locating holes, or in other machine operations, which must be carried out accurately, relative to a given datum. Jig borers are available where extreme accuracy is required and expensive equipment is warranted. In the great majority of cases, however, an accuracy of the order of .001" is sufficient and a jig borer is not available. In such cases the Huffam centre locator provides a quick and efficient means of establishing the required position and can be used on any machine by an unskilled operator. It will indicate the relation between the centre line of any machine spindle and a datum face to within .0005" by the 'run-off' method and to within .0002" by using the light 'line' method. Although ideally suited for use on mills the Huffam centre locator can also be used on drills, lathes or any other rotating machinery employing a chuck.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Kennedy Automotive Repair Tools

Kennedy Automotive Glass Run Channel Cleaners are for the fast removal of glass, chips and debris from run channels on side windows.

Suitable for unhooking locking weather strips around windscreens, with a long shaft for reaching deep into door recess.

Manufactured from hardened and tempered Chrome Vanadium Steel with a comfort grip.

Available in a range of sizes.
260mm length Order Code: KEN-503-8710K
330mm length Order Code: KEN-503-8720K
610mm length Order Code: KEN-503-8730K

Glass Run Channel Cleaner

Stencil Sets

Interlocking with sizes 40mm to 75mm manufactured from brass, and sizes 90mm to 150mm manufactured from zinc.

Numbered 0-9

Kennedy Professional Combination Spanner Set

Kennedy Professional combination spanners are manufactured from chrome vanadium steel to exacting manufacturing standards they have a highly polished corrosion resistant mirror finish that also prevents oil and dirt from adhering to the spanner, for easier cleaning. These long reach, wall drive spanners Conform to: ANSI B107.9M.

Kennedy Professional Quality Plier Sets

Contents:
Adjustable Wrench 150mm.
Diagonal Cutters 160mm.
Combination 160mm.

Kennedy Impact Drive Sockets

Kennedy 1,1/2" square drive impact sockets are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

1,1/2" Drive Metric Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

1,1/2" Impact Drive Sockets

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Open End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

BSW

3/4? Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.