Senator® Telescopic Extension Pole

To fit 230mm (9") bird cage paint rollers and extends from 1 to 2m by simply twisting to unlock, extending then twisting to lock again.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

3/4? Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

1/4" AF Hexagon 'Direct Drive' Screwdriver Bits

1/4" Hex with ball recess.

Torx

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

AF Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

Kennedy® Standard Industrial Terminals - Yellow Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Medium Duty Masonry Saws

Tungsten carbide teeth for cutting man made building materials including soft bricks and stone, thermalite blocks etc.

Syphons

Flexible plastic outlet and semi rigid inlet tubes. Hand pumping unit incorporates one way valves. Suitable for use with petrol, diesel and non-corrosive liquids.



SPS/10 Tube length: Inlet 410mm/Outlet 530mm

Senator® Pull/Push Pocket Rules

With spring blade return. Self adjusting hook for internal and external readings. Metric and imperial readings. ABS casing. End hook has 2 rivets. graduated with 1/32nds, 1/16ths and mm.

Extension Bars

Manufactured from high quality chrome vanadium with a fully polished finish. All with knurled finger grip.

Standard