Chuck Style Tap Wrenches

Used in hand tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed.

Japanese Type

Senator® Light Duty Cast G-Clamps

Light duty cast steel. Suitable for tradesmen, engineers', woodworkers' etc.

Fume Hood

Designed for extracting fumes from work area by passing them through a carbon sponge filter. The unit has built in lighting controlled from an individual switch. Lightweight metal construction which clamps to desired work top or table. Fully adjustable both in height and reach. Voltage: 220/230V. Maximum height: 530mm. Maximum reach: 515mm.

Kennedy Automotive Battery & Electrical System Tools

For fast, simple and strong splicing of automotive electrical wires.
Easy-to-use, no wire strippers or crimper required.

Maximum electrical rating: 600 Volts
Maximum temperature: 105C
Terminal material: Brass
Plating: Tin
Insulation material: PP

Quick Automotive Wire Splicing Set 50 pieces

Contents:
Red: 0.5mm2 x 1.0mm2 (25pcs)
Blue: 1.5mm2 x 2.5mm2 (25pcs)

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 894.

Single Ended

Feeler Gauges

Hardened tempered steel blades in polished steel case.

Metric: Manufactured to DIN 2275.

13 Blade: (Range B) .05, .10, .15, .20, .25, .30, .40, .50, .60, .70, .80, .90 & 1.0mm.

Kennedy® Pen Type Pick up Tool

Maximum lifting weight 4lb

Kennedy Low Profile Trolley Jacks

Kennedy Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy 2 Tonne Low Profile Service Trolley Jack

Kennedy 2 Tonne Low Profile Service Trolley Jack is convenient and easy to use due to it"s compact design. It has a strong, robust steel chassis to provide stability when under load. A low entry height of 89mm. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The removable one piece pump handle can rotate 360 degrees and has a comfort rubber grip to rapidly raise and lower the load arm and the vehicle.

Model number: T359L
Maximum load: 2 tonnes
Minimum height: 89mm
Maximum height: 359mm
Weight: 14.5kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy Professional Roller Tool Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

3 Drawer Roller Tool Cabinet
Overall size (W x D x H): 690 x 460 x 890mm.
Drawer sizes (W x D x H): 591 x 410 x 102mm (3).
Bottom compartment (W x D x H): 610 x 432 x 356mm.

What "Car Mechanics" magazine say..."Best Buy"

"Amazing value for such a high quality product. Everything about this cabinet is well designed, almost to the point of blatant over engineering. The large wheels are metal, with rubber strip "tyres" around their edges. There are even grease screws fitted, so the bearings can be lubricated. All drawers feature positive stop resistance, which means they need a good yank to open – so you don't need to lock them prior to moving the cabinet. Roller bearing slides are used throughout, and even the keys are an unusual, high security, design."

Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.