High Grip Pound Thru' Screwdrivers

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Flared Tip, Round Blade

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Mechanical Puller Set

For harmonic balance removal, timing gears & other parts with bolt circle diameters from 38mm to 117mm (11/2" to 45/8"). Ductile steel yoke.

HPB9 Harmonic Balance

Contents: 1 x yoke. 1 x thrust bolt. 1 x ram nut. 3 x 75mm screws (3/8" x 24 UNF). 3 x 75mm screws (3/8" x 16 UNC). 1 x plastic storage tray.

Drum Deheading Tools

Non sparking brass construction. Suitable for 2" & 3/4" bungs. Multi-purpose wrench head. Additional 1 1/4" socket for tightening drum taps. Length: 300mm.

90 Handle - Brass - DW2

Oil Suction Gun SG500

Chrome finish. Suitable for rapid draining or filling of oil and other non corrosive liquids. Diameter: 63mm. Overall length: 330mm.

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Metric

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Senator® C-Clamp Grip Wrenches

Wide and deep jaw profile, clear obstacles to firmly clamp sections that a normal grip wrench cannot. Quick release lever.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Crosspoint

Knife Blades

Heavy duty blade for use on carpets and vinyl. Size: 62 x 19 x 0.65mm.

1992

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.