Bulldog Draining Tool

This solid forged tool is used for digging holes, deep narrow trenches cable channels, pipe channels, drain channels or post holes.

4574-16-2810 (Treaded)

The treads ensure comfort for the users feet and stop boot slippage in wet conditions. The T handle adds to the strength and comfort for the user.

Type: solid strapped.
Handle type: T-hardwood.
Shaft: hardwood.
Blade material: steel, epoxy coated.
Blade width: 178 - 102mm.
Blade height: 405mm.
Overall length: 1120mm.

300 Series Stillson Wrenches

Cast iron frame, drop forged handle and hardened jaws.

Cooling System Testers

For testing cooling systems on most makes of cars and vans. Pressure testing detects leaks in radiators, heater matrix, hoses, cylinder heads, engine blocks and water pumps. Expansion plugs enable fast and easy connection.

Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Metric Deep

Swan Gas Refill

For use in refilling soldering torches, lighters, utility lighters and kitchen utensils. 200ml can.

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Flat Chisel

Used by the engineering and building trades for cutting and chipping cold metals, brick work and stone. The angle of the cut edge should be 60 - 70, inclusive, but is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

High Tensile Diagonal Cutting Pliers

Chrome vanadium steel, with bonded vinyl coated textured grip handles. Double polished head and joint. Induction hardened cutting edges.

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Club Hammer with Fibreglass Shaft

Kennedy Club hammers with a fibre glass shaft have a textured slip resistant rubber grip. The shaft & grip combine to dampen the impact transmitted through to the user"s hand and wrist.

IntelliSensor&153; Pro Stud Sensor

Locates the edge of studs or joists through drywall and other common wall materials at a maximum depth of 1/2&34; and 11/2&34;. Automatic calibration switch. Multi-mode LED panel for depth indication. Buzzer indicates stud and joist edges. High impact ABS housing for strength and durability. Large, patented LCD screen for visual detection warning. Continuous live wire detection. Requires a 9V battery (not included). Automatic shut-off for longer battery life.

IRWIN Bi-metal Blue Safety Blades

Snub nose blade design helps to reduce the risk of accidental puncture wounds and has shatterproof Bi-metal blades combining the best of two metals electro-welded together for superior performance and safety which stay sharp up to 3x longer than carbon steel blades.