Snap-off Knife

9 x 85mm, 13 segment blade.

0-10-095

Hydraulic Separator Set

For removing bearings, gears, sprockets & bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.

HS7 105-150mm & HS11 75-105mm

Both sets contain: 1 x hydraulic ram. 1 x separator. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x beam. 1 x ram nut. HS7 (only) also contains 1x 80mm push plate 1x 50mm ram extension. 1x 100mm ram extension.

Kennedy Ball Pein Hammers

Ball Pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal.

Hickory Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

22mm Spigot End Fittings

Metric

Open End

Feeler Stock Coil

This handy product is housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. The stock is also useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm. The case provides the ability to snip off the desired length without any waste.

1/2" x 20ft

Adjustable Wrenches

Kennedy Professional adjustable wrenches with geometric cushion grip are manufactured to the most exacting of international standards from drop forged chrome vanadium steel that is coated with a phosphate anti-corrosion finish.


The parallel opening grooved jaws of the Kennedy Professional adjustable wrench improve grip when used on damaged or misshaped fasteners and are hardened and ground with a polished finish to ensure the wrench satisfies your requirement in the most demanding of working conditions, the jaws are laser etched with metric graduations for rapid repeatable reference setting.

The wide grooved profile of the opening mechanism and precision knurled adjusting screw ensures smooth adjustment and the slim head profile allows easy access in confined spaces, the unique geomatic cushion grip improves user comfort and is resistant to oil and grease to provide a slip free grip. It is securely bonded to the I-beam handle sub frame to prevent the ingress of oil and dirt.

Conforms to: BS 6333: 1983, ANSI B107.8: 1977, DIN 3117, ASME B107.8: 1996.

Bahco Diagonal Cutting Nippers

Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip. ISO:5749 DIN:5749. Finish: black oxidised, anti-corrosion treated.

Diagonal Cutting Nippers

Length: 140mm.

Chuck Type Tap Wrenches

Designed for holding engineers taps. Available as a chuck or standard bar type. With an adjustable T-wrench bar.

English Type

Senator® 180mm (7") Plastic Paint Roller Tray

Evenly coats the roller whilst storing paint in the reservoir. The drain-off area helps remove excess paint from the roller preventing drips.

Granton Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.

6" Straight Blade Boning Knives

Designed for cutting meat away from the bone, trimming excess fat or preparing thin cutlets.
6" Straight Blade Boning Knives
Straight blade for general boning work. Suitable for chicken and pork.