Senator® Industrial Claw Hammers

Used for general-purpose carpentry, particularly for driving and removing nails. With drop forged steel head and hardened and tempered faces.

Wood Shaft

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Safe Blow Hammer

Kennedy inside the hollow die cast aluminium hammer head are thousands of steel pellets which impact a split second after the hammer face, reducing rebound whilst also adding to the force of the blow. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time.

The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammer faces have a precision moulded screw thread that screws securely into the single piece die cast aluminium hammer head, the handle is a high strength girder section that has a shock absorbing soft dual material grip, for improved grip and control.

Craft Knife Blades

Straight, general purpose light duty.

5901

Single Ended Ratcheting Wrenches

Used for installation and servicing work. Ratcheting head mechanism for use in confined spaces. The ratchet wheels and pawls are made of carbon steel, hardened and tempered. Finished in black with red plastic handles.

Hexagon Turnover

Inch. For use on hexagon head fasteners.

Locking C Clamps with Swivel Pads

With quick release lever. Available in 4 sizes.

Precision Screwdrivers

Have nickel chrome molybdenum steel blades, hardened and tempered. Chrome plated, with swivel tops which resist oil and acid. Supplied in plastic cases. Ideal for jewellers' and watchmakers'.

Crosspoint

Spark Plug Hole Thread Chaser

Double ended for 14mm and 18mm plug hole threads. Cleans corrosion and carbon build-up from female spark plug threads and sensor sockets. Repairs minor cross threading damage.
Use with 21mm deep socket (KEN-582-5820K).

Packaging dimensions (W x H x D): 47 x 171 x 23mm.

Gross weight: 137g.

1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Registered Design No. 2053516UK. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 55mm. Bit length: 17mm. Conforms to DIN standards.

Hexagon

TN27 - Torque Multiplier

5.4:1 - Maximum Torque 2700Nm. Ideal for applications where no electrical or air supply is available. Enables precision tightening of threaded fasteners. Aids the loosening of nuts that are corroded or seized. Accurate to within plus/minus 4%, taking the uncertainty out of high torque tightening.
Replacement Square Drive Pt No 567-940.

Paste/Glue Brushes

Paste/Glue Brushes
Sizes: No.9/3 (1/4”), No.9/5 (3/4”) and No.9/6 (1”).