Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Rutland™ Garden Forks

A high quality product that is suitable for use in garden centres, parks, sports areas, industrial gardens, farms and for household use where a high quality professional product is required. The products are produced from heat treated steel which is carefully ground. These tools also have steel handles and PVC grips, carbon steel blades and plastic handles.

Border Fork

Wooden shaft and plastic handle. Overall length: 955mm. Blade size: 235 x 140mm.

Laminated Compressed Wood Mallets

Compressed and laminated wooden mallet head with flush fitting glass fibre hoops to prevent the head from splitting.

Single Ended Ratcheting Wrenches

Used for installation and servicing work. Ratcheting head mechanism for use in confined spaces. The ratchet wheels and pawls are made of carbon steel, hardened and tempered. Finished in black with red plastic handles.

Square Lever Reversible

Inch. For use on square head fasteners. Lever ratchet mechanism to allow reversal without removal of wrench from fastener.

Inch

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Kennedy® Tapered Gauges

These are called taper gauges only because of their shape. They do not measure tapers they are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered stainless steel. 0.1mm increments. Rustless. Constant at 20°C. Satin Chrome anti glare finish. Permanent black figures and graduations.

Kennedy Professional Socket Set

The most popular drive size used in the service and maintenance industries. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.

MD30MA 30 Piece Deep Metric & Imperial

Contents: Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 26, 27, 30 & 32mm. 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 11/8" & 11/4" AF. Accessories: Offset handle, swivel handle. Parts tray with magnetic insert. Robust fitted case with security padlock hole and cushion grip handle.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B234
Maximum load: 2 Metric Tonnes.
Height range: 181 to 345mm Min/Max.
Max saddle adjustment: 48mm.
Weight: 3kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Chrome Finish Adjustable Wrench Service Kits

Consist of replacement jaw, knurl and pin.

Facom 39 Short Combination Wrenches

To ISO 7738, NF ISO 7738. Short shank and compact heads. Ideal where access is restricted. 12-point ring angled at 15°. 6-point ring angled at 15°. Satin chrome finish.

Inch