Edge & Centre Finders

Much time and trouble is taken in locating holes, or in other machine operations, which must be carried out accurately, relative to a given datum. Jig borers are available where extreme accuracy is required and expensive equipment is warranted. In the great majority of cases, however, an accuracy of the order of .001" is sufficient and a jig borer is not available. In such cases the Huffam centre locator provides a quick and efficient means of establishing the required position and can be used on any machine by an unskilled operator. It will indicate the relation between the centre line of any machine spindle and a datum face to within .0005" by the 'run-off' method and to within .0002" by using the light 'line' method. Although ideally suited for use on mills the Huffam centre locator can also be used on drills, lathes or any other rotating machinery employing a chuck.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

3/4? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Granton Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.

12" Ham/Salmon Slicer

Overall length: 17 1/2'' knife. 24mm deep (top to bottom) blade for flexibility when thin slicing is required. Granton edge for easy cutting. Stainless steel blade. Dishwasher safe.

Kennedy Professional Combination Spanner Set

Kennedy Professional combination spanners are manufactured from chrome vanadium steel to exacting manufacturing standards they have a highly polished corrosion resistant mirror finish that also prevents oil and dirt from adhering to the spanner, for easier cleaning. These long reach, wall drive spanners Conform to: ANSI B107.9M.

14 Piece Metric Combination Spanner Set

Contents: 6, 7, 8, 9, 10, 11, 12, 14, 13, 14, 15, 16, 17, 18 & 19mm.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Open End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Cable Ties

Suitable for securing or retaining various shapes and sizes of object.

Drain Test Bung

Used to pressure test or temporarily seal the end of an open pipe which is newly laid or decomissioned, preventing the ingress of water, gasses, rodents.

Single-Hexagon Sockets

Used in automotive and aerospace. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location.



6 point - Offer a more positive location, particularly on worn or rounde nuts, but require a one-sixth turn to engage the next point of the socket

Yankee Screwdriver Bits

Manufactured from high quality chrome vanadium steel. To suit Yankee spiral ratchet screwdrivers.

Light Duty

To suit Kennedy 300mm Yankee and Stanley 135B Yankee, Handyman 133B Yankee and Handyman 233B Yankee.

Stanley FatMax® I-Beam Levels

Vials accuracy of 0.5mm/m for improved accuracy. Magnified center vial for more user comfort. Solid vials for better control and less slips. MaxEdge center vial : bridged center vial for continuous marking surface. Top read scale for fast measurements. Pencil included, quick help for marking. Shock absorbing end caps makes it long lasting and choc-resistant. Aluminum body removes excess dirt and prolongs life. Three vials two vertical and one horizontal.