Kennedy® Professional Pointing Trowel

Manufactured from high carbon tempered and hardened steel with a ground and polished finish. Tapered to remain rigid to the tip. Polished and varnished high angle handles for greater balance, control and knuckle clearance, with chromed ferrule. Holds the forged steel tang in place preventing the blade from twisting. London pattern, a smooth rounded end wooden handle with integral tang.

Standard Series Torque Multiplier

The 'Standard series' torque multiplier has been designed for the specialist user where it is necessary to provide higher torque than would otherwise be possible due to limitations on space or operator strength. This series employs multiple stage epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. The torque multiplication is accurate to more than plus/minus 4% with a maximum output of 47,500Nm. *Models contain the AWUR 'anti wind up ratchet' mechanism. As with any high ratio gearbox (25:1 or more) a certain amount of wind-up (spring) has to be taken up before any useful tightening work can be applied to the nut. Each time the input device is released, the wind-up will rotate back against the direction of operation.The AWUR mechanism retains all of the wind up forces as they are created locking the multiplier onto the nut being tightened. This means that even when used upside down the multiplier will support it's own weight.



Torque Range: 3400Nm 2500 Ibf.ft
Square Drive: 1/2?? Input 1?? Output

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Kennedy Pro-Torq Combination Pliers With Side Cutters

Manufactured from specially selected steels. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort, these are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Especially suitable for production line environments where repetitive work is undertaken.

200mm (8") Pro-Torq Combination Pliers with Side Cutters

Double polished head and joint. Serrated parallel jaws for gripping flat workpieces and a serrated curved jaw for gripping nuts, etc. Also with side cutter with induction hardened cutting edges.

Kennedy® Mini Gent's Saws

Suitable for light duty precise cutting. Narrow blade width allows use in confined areas. Polished rosewood handle with brass ferrule. Blade Width: 40mm (1 1/2")

Stencils

Stencils manufactured from hard wearing quality steel with precision cut letters for a clean sharp image. Suitable for use with all paints and marking compounds for marking packing cases with shipping details, loading/work bay walls for identification, car park spaces and countless other applications.

26 Piece Letter Sets A - Z

Miniature Pliers

Made from high quality chrome nickel steel with induction ground cutting edges. Double dipped PVC grips for user comfort and control. Used for delicate, fine and accurate work in a continuous production environment. Spring loaded return for quick repetitive opening and operator comfort. Spring-loaded return. For quick, repetitive work and operator comfort.

Needle Nose

150mm overall length.

Direct Drive Bits for Power Tools

1/4" Hex with ball recess.

Pozidriv

9150 Metal, Volt & Stud Detector

LED and audio detection for use on metal such as iron, steel, copper and brass, and can pin-point hidden screws and nails. Detects dead or live mains cables also hidden water and gas pipes, joists, battens and wooden studs. Operates through plasterboards, plywood, wall panelling and floorboards. Self calibrating with a low battery indicator. Uses 9V battery. To be used on stud walls only, not suitable for plastic pipe or foil insulated walls.

Kennedy Hexagon Keys

Kennedy hexagon wrenches are suitable for tightening and loosing socket head screws or bolts. Manufactured from fully hardened carbon steel in accordance with DIN 911. To ensure a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black oxidised finish.

Kennedy Long Arm Hexagon Wrench Set 1/16" - 3/8" AF 10 Piece

Stabila OLS 26 Optical Level

OLS 26
Optical builders level 26x magnification. Reliable reading & transfer of heights. Robust casing, easy grip, shock absorbing soft shell and solid protection of optical unit. Protection class IP54.
Weight: 2.50kg.