Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

258F

600mm long, 60 millibar capacity.

Kennedy® Drill Gauges

Manufactured from hardened steel with a satin finish. An ideal way to quickly measure the diameter of drills and steel wire. 1 - 60 Gauge. Measures drill sizes Nos 1-60. Holes are marked with size and decimal equivalent of drill.

Engineers' & Electricians' Screwdrivers

Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

Parallel

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric

Engineers' & Electricians' Screwdrivers

Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

Pozidriv

PZ/Supadriv has extra cutaways to help drive the screw. Favoured by the construction and joinery trade.

Chrome Finish Adjustable Wrenches

Kennedy industrial quality adjustable wrenches are manufactured from high strength 'I'-beam section chrome vanadium steel for improved strength and rigidity; the jaws are hardened and ground for extended tool life. An offset head angle of 22.5 provides positive torque control and the 15 slimline tapered jaws allows the wrench to be used in confined areas of access. The Kennedy adjustable wrench jaw opening exceeds ISO standards, providing you with up to 20% greater jaw capacity than conventional adjustable wrenches. Parallel jaws with smooth movable jaw adjustment and self-locking design prevent the jaws opening unintentionally even when under full load. Suitable for industrial and maintenance/assembly applications.

Highly Polished Corrosion-Resistant Chrome Finish

Snap-off Knife Blades

Kennedy Industrial quality knife blades have a superior edge hardening for longer tool life and sharper edge. Best value with longer working between blade changes and with easy, safe segment-snap to renew leading edge.
18 x 100mm 8 segment. 9 x 55mm 8 segment. 9 x 91mm 13 segments.

Kennedy Plastic Pipe Cutter Mini Hose Type

Manufactured from tough hard wearing ABS plastic. Spring loaded with a heat-treated steel blade.

Spares for Kennedy Combination Squares and Rules

Scriber:
For 6" Combination Square (KEN-597-7060K)
For 12" Combination Square (KEN-597-7120K)

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.