Sliding Bevels

Used for marking regular and irregular angles. The 9" sliding steel blade can be locked into any position using the brass thumbscrew. Rosewood stock with brass tips for greater wear resistance.

6.5 x 100mm Flat 1000V Dualgrip Screwdriver

A fully insulated screwdriver VDE tested up to 1000V. Professional high grip handles, magnetic tips, chrome vanadium steel blades.



Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Plastic Funnels

With anti-splash rims.

Telescopic Transmission Jack

Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3" dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875mm to 1800mm.
Capacity: 1/2 Ton.
Ram Extensions: 2.
Minimum Saddle Height: 875mm.
Maximum Saddle Height: 1800mm.
Saddle Size: 680x810mm.
Chain Length: 95mm.
Saddle Tilt Forward: 24".
Saddle Tilt Back: 19".
Saddle Tilt Side: plus/minus 20".
Saddle Return Weight: 15.8kg (35lbs).
Base: 95 x 805mm.
Weight: 68.5kg.

Screwdriver Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 3/8"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 50mm. Bit length: 20mm. Conforms to DIN standards.

Hexagon

Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Metric

Single Ended Ratcheting Wrenches

Used for installation and servicing work. Ratcheting head mechanism for use in confined spaces. The ratchet wheels and pawls are made of carbon steel, hardened and tempered. Finished in black with red plastic handles.

Hexagon Turnover

Metric. For use on hexagon head fasteners.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Spline

Girder Section Levels

Industrial quality with three factory set vials, horizontal and 2 plumb, aluminium body with powder coat finish. Accuracy: 0.75mm/m. Top face marked with metric and imperial graduations.

Variable Angle Magnetic Clamp

Can be set to any angle from 25° to 280° the main angles of 90°, 60°, 45° and 30° are marked for quick reference. For holding tube or sheet for welding and assembly applications.