Universal Ball Joints

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Sizes 1/2" and above feature a hole to accommodate a pin and ring to prevent accidental removal for added security.

3/8" Square Drive Bi-Hexagon Sockets

Chrome vanadium. Bi-hexagon. (12 point). All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all 3/8" drive accessories.

Metric Deep

Long Reach Mechanical Pullers - 2 jaw - Industrial Reversible/Adjustable

The points at which the jaws are attached to the pulling frame, are adjustable providing more pulling options.
083300:
Spread: 350mm.
Reach: 380mm.

Kennedy® Standard Industrial Terminals - Red Female Socket

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Diesel Compression Tester CV Kit

Suitable for use on both direct and indirect diesel injected commercial, marine and industrial engines. Contents: \t5/16 x 24 UNF internal & 1/2 x 20 UNF external threaded centre pillar. 20.5 x 30, 23.6 x 32, 23.6 x 41 end adaptors. Replacement seal and washer kit. Two clamp plates. 90 elbow. Gauge diameter: 100mm. Scale: 0 - 60 bar.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B3047
Maximum load: 30 Metric Tonnes.
Height range: 285 to 475mm Min/Max.
Max saddle adjustment: n/a
Weight: 23.20Kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Positive Indent Low Stress Punches

For use on brittle material to avoid damage.

27 Piece Letter Sets A - Z Plus &

1/4" AF Hexagon Drive Screwdriver Bits

All double ended screwdriver bits with 1/4" Hex and overall length 60mm (2.3/8").

Crosspoint

Neodymium Pot Magnets

Neodymium magnet in a cylindrical brass pot. Assembled with steel pole pieces to give a multi-pole effect which offers superior grip at the contact face ideal for clamping or lifting application. Ideally work at temperatures upto 80°C, but have a maximum working temperature of 100°C

Deep

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Hexagon