Engineers' & Electricians' Screwdrivers

Kennedy Engineers' & Electricians' Screwdrivers have a traditional fluted design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

Parallel

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Kennedy Roadside Assistance

Kennedy Booster cables are manufactured from top quality double insulated multi strand copper cable for maximum power transfer.

Fitted with heavy-duty spring loaded clamps with heavy insulating sleeves for secure connection.

Suitable for cars, light commercial, HGV, PSV, marine and agricultural applications.

Available in three ratings:
Light duty rating 220Amp Order Code: KEN-503-5200K
Medium duty rating 350Amp Order Code: KEN-503-5250K
Heavy duty rating 480Amp Order Code: KEN-503-5280K

BBC35 Heavy Duty Booster Cables

BBC35 Heavy Duty Booster Cables Specification:
Suitable for: 12 & 24V systems.
Cable length: 4.5m.
Cable diameter: 35mm2 multi-stranded core
Rated to: 480amps.

Kennedy Ball Pein Hammers

Ball Pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal.

Hardwood Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

Inch

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Rutland™ Stainless Steel Garden Tools

Rutland™ garden tools are proud to introduce their premier stainless steel range of gardening tools. The highly polished and ground stainless steel blades will not get so clogged up with soil and will cut cleanly through even the heaviest types of soil.

FTS003 Stainless Steel 3 Piece Hand Trowel and Fork Set

The Rutland™ stainless steel hand trowel and fork set is ideal for use in the potting shed and around the garden when weeding and planting. Each tool has a traditional shaped plastic handle.

Included in the set are a:
Hand trowel 300 x 81mm
Weeding fork 270 x 76mm
Graduated bulb planter 300 x 65mm

Facom® Protwist® Screwdriver Set

Good torque transmission and fast screwing speed. Natural grip, excellent comfort. Soft polyurethane zone, polymide core for high resistance to impact, stress, abrasion and chemical agents.

8 Piece Screwdriver Set

AN.J8PB
Controlled hardening for excellent flex resistance. Machined blades for a perfect fit in the screw head. Moulded polymer handle for durable performance, a comfortable grip and excellent resistance to chemicals. Colour coded for fast selection to the right screwdriver for the job. Round blades are top quality chrome silicone manganese steel and hexagonal blades are high performance steel containing silicone, manganese and molybdenum. Lengths from 75mm to 175mm.

Set contains:
Slotted 4, 5.5, 6.5, 8mm.
Phillips PH1, PH2.
Pozi PZ1 and PZ2.

Inch

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Holdfasts

Suitable for work holding and work handling. Supplied complete with release screw carry handle. Can be used in temperatures up to 100°C.

Kennedy 1 Tonne Scissor Jack

Made from heavy duty steel. Designed to safely raise vehicles. Easy to use and compact for easy storage. Rubber saddle provides a positive grip and prevents damage to jacking points. Lifting range: 88 - 383mm (3 7/16" x 15 1/16"). 1 Tonne (1000kg) safe working load. Wide base plate for extra stability. Base plate size: 150 x 90mm. Spindle thread 12.5 x 2.5mm.

1 Tonne Scissor Jack

Edge & Centre Finders

Much time and trouble is taken in locating holes, or in other machine operations, which must be carried out accurately, relative to a given datum. Jig borers are available where extreme accuracy is required and expensive equipment is warranted. In the great majority of cases, however, an accuracy of the order of .001" is sufficient and a jig borer is not available. In such cases the Huffam centre locator provides a quick and efficient means of establishing the required position and can be used on any machine by an unskilled operator. It will indicate the relation between the centre line of any machine spindle and a datum face to within .0005" by the 'run-off' method and to within .0002" by using the light 'line' method. Although ideally suited for use on mills the Huffam centre locator can also be used on drills, lathes or any other rotating machinery employing a chuck.