1/2" Square Drive Screwdriver Bits

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2"square drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily. Registered Design No. 2053516UK. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. All have ball retaining groove on each face of the square drive. Overall length: 55mm. Bit length: 17mm. Conforms to DIN standards.

Slotted

Kennedy Professional Flare Nut Spanner Sets

Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. Can be used on hydraulic pipes, brake pipes etc. The wrench will fit over the pipe to give a positive location on the nut. Conform to: ASME B107.4.

Metric (5 Pieces)

Contents:
8 x 10, 9 x 11, 12 x 14, 13 x 15 and 16 x 17mm.

SavBit Multicore Solder Dispenser

Special alloy solder. For all electrical work. Enables fine copper wires to be soldered more efficiently. Reduces tip corrosion. With 5 core Ersin non-corrosive, low residue flux. Melting range of 182 - 215C. Diameter 1.2mm.

Service Cases

Manufactured from co-polymer plastic. Resistant to denting, scratching. Virtually unbreakable. Suitable for transporting and storing smaller items, with opaque lids that allow the contents to be seen at a glance. The lids have three hinges for increased strength and durability, sliding catches securely hold the lid closed. Available with either fixed compartments or without, so that you can select divider inserts to meet your requirements. All cases are fitted with feet to allow them to be stored in the vertical position.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Hexagon

30mm Offset Chrome Vanadium Combination Spanner

Chrome vanadium steel. 15&186; cranked open end. Offset ring end. Conforms to DIN 3113B.

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy Clamps

Kennedy Dual Action Quick Clamps they are designed for use one handed and for speed and convenience. The pistol grip handle houses a ratchet clamping mechanism, that incrementally applies clamping force when you pull the trigger, to release or reposition the clamp jaw hold down the quick release button and slide the jaw along the bar. Soft interchangeable pads eliminate the need to find wood blocks to protect your work. Can be used as a bar clamp or as a spreader simply by turning the handle around.

Dual Action Quick Clamps

Available in four capacities:
150mm/6" Order Code: KEN-539-3060K
300mm/12" Order Code: KEN-539-3120K
450mm/18" Order Code: KEN-539-3180K
600mm/24" Order Code: KEN-539-3240K

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Metric

Kennedy Decorators' Scrapers

Replacement 4 edge blade for Kennedy Four Edge Decorators Scraper Order Code: KEN-533-1620K. N.B. Scraper not included.

Replacement 4 Edge Scrapper Blade