1/4" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Adjustable Flat Bits

Manufactured from high carbon steel ground and honed blade suitable for cutting holes in wood, plastics etc. Cutting diameter can be infinitely varied within range. Graduated scale with locking screw. For use in 3 jaw chucks. 9.6mm hexagon shank. Overall length: 170mm.

Classic Mechanical Torque Wrenches

Ideal for use in noisy environments. The torque build up can easily be recognised by three signals: Sight - see the wrench start to break; Touch - feel the point of torque; Sound - the ratchet 'click'. Hard wearing mechanism retains +/- 3% accuracy for up to 10,000 operations. Push through square drive connector for instant direction reversal. Easy to read permanent scale with large clear markings that are branded into the handle. Retracting torque adjuster that cannot be altered by accident ensuring accuracy on repetitive operations.

1/2" Square Drive

Torque Range: 70-330Nm 10-250Ibf/ft

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Kennedy Grip Wrenches

Kennedy grip wrench bodies are manufactured from rolled chrome vanadium steel and have drop forged hardened steel jaws with corrosion resistant bright nickel coating. The jaw opening and clamping pressure can be adjusted with the knurled head screw and is fitted with a wire spring to open the jaws automatically. The locking mechanism holds the wrench in place once adjusted, leaving both hands free and is easily disengaged by squeezing the release lever.

Set of 2 - Curved Jaw

Contents: 1 each 125 & 255mm

Bahco Diagonal Cutting Nippers

Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip. ISO:5749 DIN:5749. Finish: black oxidised, anti-corrosion treated.

Diagonal Cutting Nippers

Length: 200mm.

Kennedy® Miniature Hook & Pick Set

Includes straight pick, full hook, 90° hook and 45° hook. Ideal for use on cotter pins, keys, 'O' rings, springs and washers. Hardened and tempered chrome vanadium steel shanks with a knurled section for precise grip. Impact resistant square section handles for secure grip even when greasy. Overall length: 120 - 130mm (4.3/4" - 5.1/8").

Kennedy Cold Chisels

Kennedy cold chisels are manufactured from high quality, high strength octagonal section chrome vanadium steel with ground cutting edges. They are are used to channel brickwork, concrete, chip stone and to remove waste metal when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools. The head of each chisel is chamfered to slow down the formation of the mushroom shape caused by hammering. Conform to: BS3066.

Flat Chisel

Used by the engineering and building trades for cutting and chipping cold metals, brick work and stone. The angle of the cut edge should be 60 - 70, inclusive, but is dependant on the material to be cut. When cutting metal, the softer the material is, the more acute the cutting angle should be.

Galvanised Watering Cans

Removable brass rose head. With reinforced nozzle and side handle.

Senator® Engineers' Ball Pein Hammer

Manufactured from finest quality drop forged steel, hardened and tempered with ground & polished heads.

Hickory Shaft